... to make multi-color hard-edge gradient fills possible
Add a new "step" gradient-segment blending function, which is 0
before the midpoint, and 1 at, and after, the midpoint. This
creates a hard-edge transition between the two adjacent color stops
at the midpoint. Creating such a transition was already possible,
but required duplicating the same color at the opposing ends of two
adjacent stops, which is cumbersome.
(cherry picked from commit 68bf99e806)
Add an option to record a performance log through the dashboard.
The log contains a series of samples of the dashboard variables, as
well as the full program backtrace, when available. As such, it
essentially acts as a built-in profiler, which allows us to
correlate program execution with the information available through
the dashboard. It is meant to be used for creating logs to
accompany perofrmance-related bug reports, as well as for profiling
GIMP during development.
The sample frequency defaults to 10 samples per second, but can be
overridden using the GIMP_PERFORMANCE_LOG_SAMPLE_FREQUENCY
environment variable. Backtraces are included by default when
available, but can be suppressed using the
GIMP_PERFORMANCE_LOG_NO_BACKTRACE environment variable.
Logs are created through the new "record" button at the bottom of
the dashboard dialog. When pressed, a file dialog is opened to
select the log file, and, once confirmed, data is being recorded to
the selected file. Recording is stopped by pressing the "record"
button again (we use a highlight to indicate that recording is
active.)
While recording, the "reset" button is replaced with an "add marker"
button, which can be used to add event markers to the log. These
can be used to mark events of interest, such as "started painting"
and "stopped painting", which then appear in the log as part of the
sample stream. Markers are numbered sequentually, and the number
of the next (to-be-added) marker appears on the button. Shift-
clicking the button adds an empty (description-less) marker, which
is only identified by its number; this can be used when markers
need to be added quickly.
The log is an XML file, containing some extra information (such as
the output of "$ gimp -v", and symbol information) in addition to
the samples. The data in the file is delta-encoded to reduce the
file size, meaning that samples (as well as some other elements)
only specify the changes since the previous sample. This adds a
necessary decoding step before data can be processed; the next
commit adds a tool that does that.
There are currently no tools to actually analyze the data -- that's
still TBD -- but at least we can start gathering it.
Squashed commit of the following:
commit ee1ff7d502658cfa1248a13a3f0348495db07eda
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sun Jul 29 00:31:47 2018 +0900
Fixed that gimp-text-dir-ttb-* icons are lacked in Symbolic.
commit d87d012d697628da28fe90199cc04b95b72ba8ef
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 16:23:10 2018 +0900
Fix a typo.
commit cf0238bf7df56c384cdf3b7ec69557d14740f853
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 15:50:57 2018 +0900
Fixed seg fault error.
commit b07f60d06fa1a753fda5b4d46af01698c344154e
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Fri Jul 27 17:15:34 2018 +0900
Add support for vertical text writing.
https://gitlab.gnome.org/GNOME/gimp/issues/641
(cherry picked from commit 587d9bbb03)
The zoom focus discussion on IRC suggests that everybody is annoyed
about centering behavior (or lack thereof), so here is a way to
explicitly center the image witout zooming.
The debug menu is currently not included in stable versions.
Include the menu unconditionally, but hide it, and its associated
actions, by default in stable versions. Allow enabling the menu
using a new --show-debug-menu command-line option, in the same vein
as --show-playground.
Our composite modes don't correspond directly to the Porter-Duff
operators after which they're named, and these names aren't too
descriptive anyway.
Rename the composite modes as follows:
Source Over => Union
Source Atop => Clip to Backdrop
Destination Atop => Clip to Layer
Source In => Intersection
Update relevant code, including UI text, enumerator names, function
names, and action names.
The four remaining "classic" color tools (Brightness-Contrast, Curves,
Levels and Threshold) are in fact just special UIs for otherwise
completely normal filter ops.
Add normal filter actions for them and invoke them like all
other filters, which makes them show up in the filter history
automatically.
The only small hack needed is to special case them in
gimp_gegl_procedure_execute_async() so the right tools are created
instead of the default GimpOperationTool. Also, blacklist the
automatically generated tools actions from action search and the
shortcut editor.
Refactor GimpDashboard to autogenerate the UI based on a
description of the different variables, fields, and groups.
Allow individual groups to be expanded/collapsed, and individual
fields to be enabled/disabled. Save the relevant state in the
dashboard's aux-info.
Add fields for the new GeglStats properties, as per GEGL commit
25c39ce6c9bb618f06ac96d118e624be66464d74. The new fields are not
enabled by default.
Add "reset" action, to clear the history, and reset cumulative
data.
The dashboard dockable shows the current GEGL cache and swap sizes,
and their recent history. It has options to control the update
rate and history duration of the data, and an option to warn (by
raising/blinking the dialog) when the swap size approaches its
limit.
Add "In Place" variants for all sorts of pasting:
- extend the GimpPasteType enum with IN_PLACE values
- add the needed actions and menu items
- merge the action callbacks into one, taking an enum value as parameter
- refactor the pasting code in gimp-edit.c into smaller functions
We probably have too menu items in the "Edit" menu now, needs to be
sorted out.
Currently, the error console is highlighted (shown/blinked) only
upon errors; however, warnings, which are not shown on the
statusbar while the error console is open, often also contain
important information.
Allow the user to configure which message types (errors, warnings,
and regular messages) highlight the error console, using a new
"highlight" submenu in the error-console menu. Add corresponding
config options, saved in sessionrc. By default, highlight the
error console unpon both errors and warnings.
they will all be plain filters soon enough, can just remove them
already and clean up the menu.
Also put the tools which don't modify the image together in a group,
enclosed by separators.
by encoding them directly in the string attached to all filter
actions. The code now supports both "gegl:some-operation" and
"gegl:some-operation\n<serialized config>".
Add "default_settings" to GimpGeglProcedure to store the settings of
the invoking action, much like the "default_run_mode" member.
Change filters-commands.c to parse the new operation string, create
GimpGeglProcedures with the deserialized settings, and use those
settings when the procedures are ran.
Change the filter history to be smarter about what is already in the
history, there can now be several different procedures with the same
name.
Remove the dilate and erode actions from the drawable group, and add
them to filters, they are just special cases of value-propagate with
fixed settings.
so they show up in recent filters, and don't need their own callbacks.
This has the problem that they now show a GUI with no options, but
that simply puts on more pressure to fix this general uglyness of ops
without editable properties.
"layers-text-tool" action shows as "Text Tool" while "vectors-path-tool"
shows as "Path Tool". That's very confusing with tools-text and
tools-vectors respectively.
These actions are mostly about entering in edit mode with the active
layer or path. For text layers, it will enter text edition on canvas,
whereas just open the attributes edition dialog on other layers. For
consistency, layers-text-edit is renamed as well too layers-edit-text.
This also fix the side effect of commits 10099bd and 526918b where I
didn't realize that layers-text-tool was also working on non text layers
on purpose (being very badly named). Now there is a separate layers-edit
and layers-edit-text.
Thanks to Pat David for English corrections. :-)
set all legacy modes to completely immutable and the LAB modes'
blend mode to immutable. Change GimpLayer setters and the UI
accordingly. Remove the LAB color spaces from the GUI, they can
only be used with the LAB blend modes anyway and not changed.
move core photo/light adjustment ops like exposure and color temperature to the
topmost section of the menu, and move the more artistic threshold, colorize and
posterize options to the bottom section.
Largely based on a patch by Ell, with the enum type renamed and
various small changes. Adds another axis of configurability to the
existing layer mode madness, and is WIP too.
Add property "color-tag" of type enum GimpColorTag to GimpItem so all
layers, channels and paths can be tagged with a color.
For interoperability, use the color list from Krita which is a
superset of Photoshop's colors.
Features a "Color Tag" submenu in the layers, channels and paths
menus, a row of color radio buttons in the properties dialogs,
undo and PDB API.
As a side effect, some common code is now factores out into
items-actions.[ch] and items-commands.[ch] which adds visible, linked
and lock actions for layers and channels.
Have "Save" and "Restore" buttons in both the tool preset list/grid
and the tool preset editor. The save button stores the active tool's
options in the preset, if possible.
Add a SELECT_SOFTPROOF_PROFILE mode to the color profile dialog and
use it to select a profile from a newly added "Soft-Proofing Profile..."
menu item in view -> color management.
Replace the 3-state "off", "display" and "softproof" radio items by
two toggles "enable" and "softproof". Also add separate controls for
display and softproof options.
Add rendering intent, black point compensation and gammut warning menu
items to View -> Color Management. They set the respective values of
the active color management mode, so both "color managed display" and
"print simulation" are almost completely configurable per-display
now. Setting the simulation profile is still missing.
