We were creating the pad device on wp_tablet_pad.done, but
at that time we do not know what tablet it is associated with,
thus we cannot get appropriate vid/pid/name properties for it.
To get that, we need to wait for the pad to enter a surface,
at that time we do know what tablet it is associated with, so
we can get better information about the device.
There are pads that may plausibly "change" tablet between
one .enter event and the next (e.g. Wacom Express Key Remote),
but this situation is highly unlikely. The pad devices created
are thus persistent until that situation happens.
gdk_wayland_drop_context_update_targets gets targets from the
selection's offer. In order to ensure that the drop context has
up-to-date targets, update the selection's offer before updating
targets.
This fixes drag-and-drop not working reliably when running Firefox in
Plasma Wayland session.
At best, it's just an awkward event mask sitting there for a backend
that does not need it. At worst, this may result in motion events being
eaten away in the right set of circumstances.
Avoid the pointer motion hint mask, and rely on events being further
than hints.
Related: https://gitlab.gnome.org/GNOME/gimp/-/merge_requests/534#note_1526935
When destroying a wl_surface (e.g. when a window or menu is closed), the
surface may continue to exist in the compositor slightly longer than on
the client side. In that case, the surface can still receive input
events, which need to be ignored gracefully.
In particular, this prevents segfaulting on wl_surface_get_user_data()
in that situation.
Reported in
https://gitlab.gnome.org/GNOME/gtk/-/issues/3296
The same issue for pointers/keyboards was reported in
https://bugzilla.gnome.org/show_bug.cgi?id=693338
and fixed with in
bfd7137ffb3625f17857a8fc099a72
In pointer_surface_update_scale(), only rescale the cursor surface when
the scale has actually changed and the cursor is on at least one output.
fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/3350
Right now, this issue is not completely understood, so it might also
involve some questionable handling of cursor surface by sway/wlroots.
However, irrespective of that issue, this patch avoids unnecessary calls to the
compositor, and there should be no drawback: Whenever the pointer enters
a new output, pointer_surface_update_scale() will be called again, such
that correct scaling of the cursor is still ensured.
There is a slight difference: When the cursor leaves the last output,
previously the image was reset to scale factor 1. Now, it keeps whatever
was last. That might be more sensible than the previous behaviour,
assuming that it's likely that when the cursor enter an output again, it
has the same scaling. Alternatively, if one cares about resource usage
at this level, it might make more sense to destroy the surface then
rescaling to 1.
Additionally to gtk_primary_selection, the gtk-private predecessor,
support the upstream unstable protocol.
This allows the primary selection to work on Kwin and potentially
other compositors, as well as dropping the private version eventually.
Closes https://gitlab.gnome.org/GNOME/gtk/-/issues/2591
If the tablet gets removed/freed while there are pad events in flight,
we leave a dangling pointer from the pad to the tablet, which may
lead to invalid reads/writes when handling the pad event(s).
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2748
When we `Alt+Tab` away from a GTK application, it loses keyboard focus.
If we don't clear the modifiers, events from other devices that we
receive while unfocused will assume `Alt` is still pressed. This results
in e.g. Firefox navigating through the history instead of scrolling the
page when using the mouse wheel on it.
We don't get any information about modifiers while we are missing
keyboard focus, so assuming no modifiers are active is the best we can
do.
The shell sends us a modifier update immediately before we regain
keyboard focus, so the state shouldn't get out of sync.
Fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/2112
The event may end up freed after delivery, ensure to keep the data we need
in order to emit the matching emulated crossed event matching a proximity
event.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
The code managing this accounting mixed seat and tablet output lists,
can't bode well. Fixes invalid reads on list elements, as there are
dangling pointers.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2157
This fixes an issue where stylus proximity in/out events emulate enter/leave events.
The emulated events didn't contain the correct slave device and therefore the
resulting device class was set incorrectly. Crossing event emulation now also
works with slave devices.
Closes#2070Fixes#2070
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/2070
And update the surface accordingly (eg. scale on hidpi). The mechanism
that did that for wl_pointer has been made generic so it can be shared
with tablets too.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/1675
Cursor surfaces didn't listen for output scale changes, meaning they
didn't adapt their scale when an output changed scale, which could
happen for example when changing the monitor scale via Settings.
gdk_wayland_*_grab()/ungrab() would emit crossing events which translate
as focus_in/focus_out events for keyboard.
However, the ungrab() functions compare the native toplevel as this is
what gets the Wayland pointer enter/leave events with the grab window,
so if the grab is issued on a child gdk window, those won't match and we
would emit more focus_out events than focus_in events.
This means that a widget such as spice-gtk which issues a keyboard grab
whenever the pointer enters the window and releases the grab when it
leaves the window would get uneven numbers of focus_in/focus_out events.
Also, gdk_wayland_seat_ungrab() would not emit crossing events for
keyboard devices, whereas gdk_wayland_device_ungrab() does, which adds
even more potential discrepancies between focus_in/focus_out events.
To solve this problem, introduce two new helper functions which check
the relevant native windows to emit crossing events when needed that get
called evenly from both gdk_wayland_seat_grab()/ungrab() and gdk_Wayland
_device_grab()/ungrab() APIs.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=780422
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/792
When an animated cursor was set and the previous cursor animation delay
happened to be the same, we wouldn't restart the animation timeout and
just return G_SOURCE_CONTINUE assuming the timer would continue. This
assumption is however only valid if the function was called from the
timeout, which is not the case.
Instead also arm the timer also if there is no previous timer active.
The header linux/input.h used by GDK is specific to Linux. It is
possible to get a few Linux headers on FreeBSD by installing v4l_compat,
but it is usually better to use the one shipped with FreeBSD.
We prefer dev/evdev/input.h to linux/input.h here, so it will always use
dev/evdev/input.h on FreeBSD regardless of v4l_compat.
https://svnweb.freebsd.org/changeset/ports/465644
BTN_STYLUS3 is defined by the Linux 4.15 kernel and is sent when the
third button on a stylus is pressed. At the moment, only Wacom's "Pro
Pen 3D" has three stylus buttons. Pressing this button triggers a button
8 event to be sent under X11, so we use the same mapping here.
https://bugzilla.gnome.org/show_bug.cgi?id=790033
It is unlikely that popup windows will contain anything that requires this
(popup menus being more interested in redirecting keyboard focus to
themselves). OTOH popup implementations that just grab the keyboard are
commonplace enough, it makes sense not to trigger inhibition for these.
https://bugzilla.gnome.org/show_bug.cgi?id=789268
This adds support for the shortcut inhibitor protocol in gdk/wayland
backend.
A shortcut inhibitor request is issued from the gdk wayland backend for
both the older, deprecated API gdk_device_grab() and the new gdk seat
API gdk_seat_grab(), but only if the requested capability is for the
keyboard only.
https://bugzilla.gnome.org/show_bug.cgi?id=783343
Adds support for creating scroll events from Wayland tablet wheel events.
Even though no Wacom tablet puck has a smooth-scrolling wheel, both event
types need to be generated to make the upper layers happy.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
If a tablet device is used to perform actions like window moving or resizing,
GTK must provide the correct implicit grab serial number over Wayland to Mutter
in order for the action to succeed. This commit adds tablet support to the
implicit serial getters.
https://bugzilla.gnome.org/show_bug.cgi?id=777333
Under Wayland, when multiple keys are pressed and the user releases a
key, key repeat should continue unless the key released is the one
currently repeating.
In the case of:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key2 repeat
- key2 release
The behavior should be to cancel keyboard repeat, though key1 is still
held down. This is consistent with prior X11/XWayland behavior.
The following also must work:
- key1 press
- key2 press
- key2 release
- key2 press
- key1 release
- key2 should continue to repeat
The fix for bug #778019 should continue to work:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key2 should repeat
The choice to change the counter nkeys to the flag repeat_active
helps to solve the second test case.
https://bugzilla.gnome.org/show_bug.cgi?id=781285
With Wayland, GDK_DEBUG=events would log key events but not explicitly
state whether the event is a key press or release, or if it's
originating from a key repeat.
Add some more verbosity to make sure these informations are logged on
key delivery when GDK_DEBUG is set.
https://bugzilla.gnome.org/show_bug.cgi?id=781767
Make sure to clear up the number of keys being pressed on enter/leave so
that we don't end up with leftovers if a new window is mapped by a
keyboard shortcut.
https://bugzilla.gnome.org/show_bug.cgi?id=779374
The key repeat is stopped as soon as a key is pressed, so if the user
quickly presses a key while another is already pressed and being
repeated, key repeat gets cancelled:
- key1 press
- key1 repeat
- key2 press -> key1 repeat stopped
- key1 release
- key 2 is not repeated even though it's kept depressed
This is a different behavior from X11, which confuses migrating users.
To mimic the X11 behavior, keep track of the number of keys pressed
simultaneously and cancel key repeat only when none is pressed.
This way, if a user pressed a key while another one is being repeated,
the new key press can possibly be repeated as well.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=778019
Elsewhere we already go through the keymap to get modifiers so we
should do the same here. In fact, this was relying on xkb modifier
mask values being bitwise compatible with GdkModifierType which isn't
necessarily true.
https://bugzilla.gnome.org/show_bug.cgi?id=770112
xdg_shell v6 allows grabless popups, whose behavior is not that
different from override redirect windows with no grab to take
keyboard input (and pointer events outside).
This means we can relax the requirement to have a grab before
creating an xdg_popup. The warning is still useful to have so
people stop relying on gdk_window_show();gdk_device_grab() being
an ok pattern to popup a window, it's been moved to wayland
implementation of gdk_device_grab() instead, so we warn if trying
to grab a GDK_WINDOW_TEMP window that's already visible.
https://bugzilla.gnome.org/show_bug.cgi?id=771694
The wayland tablet protocol allows notifying the compositor with
descriptions of the actions performed by each tablet element. This
API call allows to hook up in to this wayland-specific feature.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
These devices are kind of an strange case. Their "master" device is
the keyboard, because they share toplevel focus with it, regardless
of stylus focus. Nonetheless, they are only expected to send the
GdkEventPad* set of events.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
This is a subclass of GdkWaylandDevice that implements GdkDevicePad,
all pad features are looked up from the info obtained through the
tablet v2 interface.
https://bugzilla.gnome.org/show_bug.cgi?id=770026
An xdg-popup requires a serial that the compositor will compare against
its own serial and will dismiss the popup if it doesn't match.
gtk+ uses either a pointer or touch serial for its helper function
_gdk_wayland_seat_get_last_implicit_grab_serial() but if the menu is
triggered before the user has had any pointer or touch interaction with
the client, using a keyboard shortcut, there is neither pointer nor
touch serial available, and gtk+ will use 0 as the default.
As a result, the compositor will instantly dismiss the xdg-popup. In
this case, gtk+ should use the keyboard serial instead.
Track keyboard serial as well and use the keyboard serial as the value
if there is no newer pointer or touch serial available.
https://bugzilla.gnome.org/show_bug.cgi?id=768017
