The second parameter should be GStatBuf*, which will be defined to be
the right struct depending on the actual platform. Using `struct stat*`
was good on Linux but was outputting warnings on other platforms (at
least on Win32).
(cherry picked from commit 6bc6a07b7e)
Pass the swap-compression option set in the preferences down to
plug-ins, so that they use the same swap-compression algorithm as
the main app.
(cherry picked from commit 5cc289b642)
paste as brush, paste as pattern, select to new brush, select to new pattern
fill selection outline, fill path, stroke selection, distort, rounded rectangle
indexed color conversion, merge visible layers, new guide, new guide (by percent)
image properties, newsprint, fractal explorer, sample colorize, new layer
metadata editor (just a button), spyroplus (only common buttons)
Add a new gimp:offset operation, which implements equivalent
functionality to gimp_drawable_offset(), in preparation for adding
an interactive offset tool.
To simplify things, add a GIMP_OFFSET_WRAP_AROUND value to the
GimpOffsetType enum, to avoid the need for a separate wrap-around
flag. This makes the gimp-drawable-offset procedure parameters a
little superfluous, but whatever.
(cherry picked from commit 40fefb6076)
Older --enable-binreloc configure option had basically the same purpose
as the newer --enable-relocatable-bundle, though the old binreloc was
only used for gimpenv.c code.
As a consequence, commit 10ce702188 was still not working fine since
gimp_installation_directory_file() also need binreloc enabled (to be
actually relocatable).
Let's get rid of this whole mess, by implying we want binreloc code to
be used when --enable-relocatable-bundle is ON. We don't need the
m4macros anymore, since AM_BINRELOC was basically just checking that
`/proc/self/maps` was present. But anyway being present at compile time
does not mean it will be at runtime (nor the opposite). So this test is
not that useful. The binreloc code will anyway fallback gracefully to
the non-binreloc code (i.e. trying to use build-time install paths) if
the procfs is lacking at runtime.
(cherry picked from commit 4d84c1d7ee)
Fix previous commit.
Ahahah! Mitch, you didn't test your code before pushing! Bad boy! :P
(cherry picked from commit db00616888)
(Bad Jehan didn't pick this to 2.10)
... on macOS.
The debugger running on macOS is usually lldb and (from the reports we
get) it looks like lldb displays the tid as hexadecimal on macOS
(whereas lldb displays decimal tid on Linux! I know, it's confusing, yet
consistent with crash report experience!). So let's just do the same,
making it easy to quickly copy-search in order to look up the crashing
thread (without having to convert from decimal to hexa).
This is a bit of an approximation as I imagine we could have gdb on
macOS or whatever edge case. Let's say it's good for the common case and
still not an error otherwise (just a base conversion away).
(cherry picked from commit 8e0135362e)
gimp_metadata_add() which is used to set blobs or EXIF, XMP and IPTC
on a GimpMetadata also needs the logic to set "multiple" tags in one
go, or it will lose all but the first one.
(cherry picked from commit 479fd5b24b)
We were not taking into account tags that can appear multiple times,
such as "keyword", they are handled by gexiv2 with the
get_tag_multiple() and set_tag_multiple() functions.
gimp_metadata_deserialize_text(): when deserializing our XML format,
check if a tag is already set on the metadata as "multiple" and if yes
retrieve it, append the new value and set it again.
gimp_image_metadata_save_finish(): take care of "multiple" values when
copying tags to new metadata created for saving.
This should preserve all values across an "import, edit, export".
Thing will still break when using the metadata editor, it doesn't
handle multiple values at all, but that code is very hard to
understand.
(cherry picked from commit d708ac0b21)
The whole bucket fill specific enum stuff is on its way out, so let's
keep this one out of libgimp for now until we decide how to present
line art filling in the PDB.
(cherry picked from commit 368f2e596a)
This was my initial choice, but the more I think about it, the less I am
sure this was the right choice. There was some common code (as I was
making a common composite bucket fill once the line art was generated),
but there is also a lot of different code and the functions were filled
of exception when we were doing a line art fill. Also though there is a
bit of color works (the way we decide whether a pixel is part of a
stroke or not, though currently this is basic grayscale threshold), this
is really not the same as other criterions. In particular this was made
obvious on the Select by Color tool where the line art criterion was
completely meaningless and would have had to be opted-out!
This commit split a bit the code. Instead of finding the line art in the
criterion list, I add a third choice to the "Fill whole selection"/"Fill
similar colors" radio. In turn I create a new GimpBucketFillArea type
with the 3 choices, and remove line art value from GimpSelectCriterion.
I am not fully happy yet of this code, as it creates a bit of duplicate
code, and I would appreciate to move some code away from gimpdrawable-*
and gimppickable-* files. This may happen later. I break the work in
pieces to not get too messy.
Also this removes access to the smart colorization from the API, but
that's probably ok as I prefer to not freeze options too early in the
process since API needs to be stable. Probably we should get a concept
of experimental API.
(cherry picked from commit cd924f453a)
This commit implements part of the research paper "A Fast and Efficient
Semi-guided Algorithm for Flat Coloring Line-arts" from the GREYC (the
people from G'Mic). It is meant to select regions from drawn sketchs in
a "smart" way, in particular it tries to close non-perfectly closed
regions, which is a common headache for digital painters and colorists.
The implementation is not finished as it needs some watersheding as well
so that the selected area does not leave "holes" near stroke borders.
The research paper proposes a new watersheding algorithm, but I may not
have to implement it, as it is more focused on automatic colorization
with prepared spots (instead of bucket fill-type interaction).
This will be used in particular with the fuzzy select and bucket fill
tools.
Note that this first version is a bit slow once we get to big images,
but I hope to be able to optimize this.
Also no options from the algorithm are made available in the GUI yet.
(cherry picked from commit 8ed12b1b98)
Add flag GIMP_METADATA_SAVE_COLOR_PROFILE to GimpMetadataSaveFlags and
initialize it from gimp_export_color_profile() in
gimp_image_metadata_save_prepare().
Adapt all plug-ins to use the bit from the suggested export flags and
pass the actually used value back to
gimp_image_metadata_save_finish().
This changes no behavior at all but creates hooks on the libgimp side
that are called with the context of an image before and after the
actual export, which might become useful later. Also, consistency
is good even though the color profile is not strictly "metadata".
(cherry picked from commit c667fdc5c0)
Pass the GEGL tile-cache size, swap path, and thread-count to plug-
ins as part of their config, and have libgimp set the plug-in's
GeglConfig accordingly upon initialization.
Move swap/cache and temporary files out the GIMP user config dir:
libgimpbase: add gimp_cache_directory() and gimp_temp_directory()
which return the new default values inside XDG_CACHE_HOME and the
system temp directory. Like all directories from gimpenv.[ch] the
values can be overridden by environment variables. Improve API docs
for all functions returning directories.
Add new config file substitutions ${gimp_cache_dir} and
${gimp_temp_dir}.
Document all the new stuff in the gimp and gimprc manpages.
app: default "swap-path" and "temp-path" to the new config file
substitutions. On startup and config changes, make sure that the swap
and temp directories actually exist.
In the preferences dialog, add reset buttons to all file path pages.
(cherry picked from commit a29f73bd9a)
... to make multi-color hard-edge gradient fills possible
Add a new "step" gradient-segment blending function, which is 0
before the midpoint, and 1 at, and after, the midpoint. This
creates a hard-edge transition between the two adjacent color stops
at the midpoint. Creating such a transition was already possible,
but required duplicating the same color at the opposing ends of two
adjacent stops, which is cumbersome.
(cherry picked from commit 68bf99e806)
In gimp_metadata_add_xmp_history(), make sure the string returned by
strftime() has a terminating \0 after we mess with its format.
(cherry picked from commit 8421221b60)
It seems that calling `lldb` when it is absent triggers some popup
proposing to install Xcode on macOS. This is obviously not good. Let's
check presence with g_find_program_in_path() instead. I was refraining
from doing so until now, because this function allocates memory, hence
may not do well during a crash.
Fortunately we don't need to check for lldb during crash (unlike gdb
which has some unacceptable behavior for older versions, at least on
FreeBSD) so that should be ok.
(cherry picked from commit 04bbe941d5)
This is my attempt to get better labels, shorter and also (hopefully)
improved English.
As Mitch states though, this is a Japanese-French-German conspiracy! So
any of you native English speakers out there, please review and suggest
proper English if needed. :-)
(cherry picked from commit 9cdedc98f8)
Squashed commit of the following:
commit ee1ff7d502658cfa1248a13a3f0348495db07eda
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sun Jul 29 00:31:47 2018 +0900
Fixed that gimp-text-dir-ttb-* icons are lacked in Symbolic.
commit d87d012d697628da28fe90199cc04b95b72ba8ef
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 16:23:10 2018 +0900
Fix a typo.
commit cf0238bf7df56c384cdf3b7ec69557d14740f853
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Sat Jul 28 15:50:57 2018 +0900
Fixed seg fault error.
commit b07f60d06fa1a753fda5b4d46af01698c344154e
Author: ONO Yoshio <ohtsuka.yoshio@gmail.com>
Date: Fri Jul 27 17:15:34 2018 +0900
Add support for vertical text writing.
https://gitlab.gnome.org/GNOME/gimp/issues/641
(cherry picked from commit 587d9bbb03)
- "LCh" intead of "LCH"
- "CIE LCh" instead of "CIELCh"
- "HSV Hue" instead of "Hue (HSV)" for all models/components
(cherry picked from commit 926dc070ef)
In gimp_metadata_set_from_{exif,iptc,xmp}(), gracefully reject data
of invalid size, returning an error instead of raising a critical.
In particular, this avoids a CRITICAL when loading an XCF with an
empty exif-ata parasite.
(cherry picked from commit eafefc7d81)
The flag `free_selection_string` is used to track an array of strings
with some of them being static and others allocated. This should have
been an array of boolean but we can't change it because it is public API
(though it should really not have been!).
So let's just allocate every string of the `selection` array instead,
which makes the boolean flag useless now.
... after each successful read().
I completely missed this declaration after a statement during the review
of !13 even though I saw another similar issue!
Also let's reset the error counter to 0 each time a successful read()
happens so that we can continue reading even if a lot of EINTR were to
happen, as long as we globally go forward. Only consecutive errors
increment the counter.
Finally add a small comment to explain why we let EINTR pass instead of
breaking directly.
(cherry picked from commit 49b4b1a5c2)
When lldb attaching to the process it triggers few "-1" errors on read with
EINTR error. After 1-2 errors read() call works again.
Also this patch fixing TID detection, syscall SYS_gettid is oficially deprecated
now and does not work. Also adding safecheck to avoid enldless loop.
(cherry picked from commit 559d9b89e3)
...upon exporting an image
Step 1: make it configurable just like "Export EXIF" etc.
app, libgimp: add "export-color-profile" config option
Add it to the preferences dialog, and pass it on to plug-ins in the
GPConfig message. Add gimp_export_color_profile() to libgimp.
Nothing uses this yet.
(cherry picked from commit 8c9c091021)
Pass the current icon theme directory to plug-ins through the
config message, and add a gimp_icon_theme_dir() libgimp function
for retrieving it. Note that we already have a similar
gimp_icon_get_theme_dir() PDB function, which we keep around, since
it can be used to dynamically query for the current icon dir,
unlike the former, and since it returns a dynamically-allocated
string, while the rest of the config-related functions return
statically allocated strings.
Use the new function, instead of gimp_get_icon_theme_dir(), in
gimp_ui_init(). This allows gimp_ui_init() to run without making
any PDB calls. Consequently, this allows us to start plug-ins that
call gimp_ui_init() without entering the main loop in the main app.
We're going to add a plug-in that displays an interactive dialog
while the main app is blocking waiting for an operation to
complete, and we need to be able to start the plug-in without
entering the main loop, to avoid the possibility of arbitrary code
being executed during the wait.
Bump the protocol version.
