Add several missing help ids, remove those that are not used anymore,
and update "gimp-colorselector-water" to "gimp-colorselector-watercolor".
Also add a comment why some help ids are not used directly.
Even though GIMP updated the name of the define for Create Template to
GIMP_HELP_FILE_CREATE_TEMPLATE, it did not change the id string.
In gimp-help this string was updated, causing help not found when asking
for help for Create Template.
This commit updates the string used for the help id to be the same as
used in gimp-help. It also removes the old define that is not used
anymore in GIMP.
This help id was used in the past but all references to it were removed
long ago with commit c53113d0cc.
Let's remove this define too since it causes a warning in gimp-help when
checking for help id's without documentation.
Moving the "Space Bar", the "Snapping" and the new "Zoom" (MR !570)
settings there. The idea is that it will also be where we'll customize
more on-canvas related abilities, such as the new zooming behavior
preferences, but also possibility to customizing or disabling the
various canvas action, and finally customizing the new contextual
settings such as brush sizing or other.
Sometimes one may want to lock visibility of a given layer. This is very
useful in particular when shift-clicking a layer visibility. In this
case, it won't be included in the list of layer to update. This can be
used for instance if you want some layers always visible (or always
hidden) while setting exclusive visibility of some other layers only.
Action "view-rotate-reset" renamed to "view-reset" (resets both flipping
and rotate). New "view-rotate-reset" and "view-flip-rotate" for
resetting rotation and flipping respectively.
gegl:focus-blur blurs the image around a focal point. It can be
used to create fake depth-of-field effects.
Add a prop-gui constructor which uses a FOCUS controller to control
the focus geometry.
Add a "show canvas boundary" display option, and a corresponding
"View" menu item and default-apperance preferences option. When
enabled (the default), the canvas boundary is shown as an orange/
black dashed line in "show all" mode.
Add a "show all" mode to GimpDisplayShell, controlled through a
corresponding "View -> Show All" menu item. When enabled, the
entire image content is displayed, instead of cropping the image
to the canvas size. More generally, the display behaves as if the
canvas were infinite. The following commits improve the overall
behavior in this mode.
Add a prefernces option to control the default "show all" state.
Add a new Offset filter tool, as a front-end to gimp:offset. The
tool replaces, and provides the same interface as, the drawable-
offset dialog, while also providing live preview and on-canvas
interaction.
Note that we don't simply use a custom propgui constructor for
gimp:offset, since we need a little more control.
This commit completely removes the "Edit -> Fade..." feature,
because...
- The main reason is that "fade" requires us to keep two buffers,
instead of one, for each fadeable undo step, doubling (or worse,
since the extra buffer might have higher precision than the
drawable) the space consumed by these steps. This has notable
impact when editing large images. This overhead is incurred even
when not actually using "fade", and since it seems to be very
rarely used, this is too wasteful.
- "Fade" is broken in 2.10: when comitting a filter, we copy the
cached parts of the result into the apply buffer. However, the
result cache sits after the mode node, while the apply buffer
should contain the result of the filter *before* the mode node,
which can lead to wrong results in the general case.
- The same behavior can be trivially achieved "manually", by
duplicating the layer, editing the duplicate, and changing its
opacity/mode.
- If we really want this feature, now that most filters are GEGL
ops, it makes more sense to just add opacity/mode options to the
filter tool, instead of having this be a separate step.
It was not doing anything right since space invasion. We now treat the
built-in sRGB profile like any other profile and never bypass
conversions based on some weird toggle.
Instead, introduce a "Use sRGB Profile" toggle which, when enabled,
hides whatever profile away so the image actually uses the built-in
sRGB profile.
This is different from discarding and then re-assigning the same
profile only by being faster and more convenient.
Add an option to record a performance log through the dashboard.
The log contains a series of samples of the dashboard variables, as
well as the full program backtrace, when available. As such, it
essentially acts as a built-in profiler, which allows us to
correlate program execution with the information available through
the dashboard. It is meant to be used for creating logs to
accompany perofrmance-related bug reports, as well as for profiling
GIMP during development.
The sample frequency defaults to 10 samples per second, but can be
overridden using the GIMP_PERFORMANCE_LOG_SAMPLE_FREQUENCY
environment variable. Backtraces are included by default when
available, but can be suppressed using the
GIMP_PERFORMANCE_LOG_NO_BACKTRACE environment variable.
Logs are created through the new "record" button at the bottom of
the dashboard dialog. When pressed, a file dialog is opened to
select the log file, and, once confirmed, data is being recorded to
the selected file. Recording is stopped by pressing the "record"
button again (we use a highlight to indicate that recording is
active.)
While recording, the "reset" button is replaced with an "add marker"
button, which can be used to add event markers to the log. These
can be used to mark events of interest, such as "started painting"
and "stopped painting", which then appear in the log as part of the
sample stream. Markers are numbered sequentually, and the number
of the next (to-be-added) marker appears on the button. Shift-
clicking the button adds an empty (description-less) marker, which
is only identified by its number; this can be used when markers
need to be added quickly.
The log is an XML file, containing some extra information (such as
the output of "$ gimp -v", and symbol information) in addition to
the samples. The data in the file is delta-encoded to reduce the
file size, meaning that samples (as well as some other elements)
only specify the changes since the previous sample. This adds a
necessary decoding step before data can be processed; the next
commit adds a tool that does that.
There are currently no tools to actually analyze the data -- that's
still TBD -- but at least we can start gathering it.
This is using GTK+3 widgets, so I make sure to keep it well separated
from core code. The gimp-2-10 version will have to rework the GUI, but
the GtkListBox and GtkSwitch are nice and make things easier, so it is
worth using them here).
The zoom focus discussion on IRC suggests that everybody is annoyed
about centering behavior (or lack thereof), so here is a way to
explicitly center the image witout zooming.
Refactor GimpDashboard to autogenerate the UI based on a
description of the different variables, fields, and groups.
Allow individual groups to be expanded/collapsed, and individual
fields to be enabled/disabled. Save the relevant state in the
dashboard's aux-info.
Add fields for the new GeglStats properties, as per GEGL commit
25c39ce6c9bb618f06ac96d118e624be66464d74. The new fields are not
enabled by default.
Add "reset" action, to clear the history, and reset cumulative
data.
The dashboard dockable shows the current GEGL cache and swap sizes,
and their recent history. It has options to control the update
rate and history duration of the data, and an option to warn (by
raising/blinking the dialog) when the swap size approaches its
limit.
Add "In Place" variants for all sorts of pasting:
- extend the GimpPasteType enum with IN_PLACE values
- add the needed actions and menu items
- merge the action callbacks into one, taking an enum value as parameter
- refactor the pasting code in gimp-edit.c into smaller functions
We probably have too menu items in the "Edit" menu now, needs to be
sorted out.
Currently, the error console is highlighted (shown/blinked) only
upon errors; however, warnings, which are not shown on the
statusbar while the error console is open, often also contain
important information.
Allow the user to configure which message types (errors, warnings,
and regular messages) highlight the error console, using a new
"highlight" submenu in the error-console menu. Add corresponding
config options, saved in sessionrc. By default, highlight the
error console unpon both errors and warnings.
- trailing whitespaces cleaned out;
- vectors are called "path" in all visible strings;
- do not check for floating selection and active channel: oppositely to
layers, a vector can be selected in the same time as a channel, and
while there is a floating selection.
