the angle arc and the small helper line were displayed on opposite
sides of the first point. Now they are on the same side, just like for
all other angles.
... gimp_transform_matrix_generic()
Replace the separate x/y coordinate arrays of GimpHandleGrid with
GimpVector2 arrays, and use gimp_transform_matrix_generic(),
instead of gimp_transform_matrix_handles(), when calculating the
matrix. When the resulting matrix is invalid, hide the guides.
... which can be used to control the guides' visibility.
Will be used by the next commit, to hide the guides in
GimpToolHandleGrid when the tranformation is invalid.
...if "Show rulers" is disabled
Add HACK to gimp_display_shell_canvas_realize() that makes sure the
rulers are always mapped once for each new GimpDisplayShell. This
seems to magically fix all the crashes.
Before you get too exceited -- no, this commit doesn't integrate
transform previews into the image graph :) We still use a
separate canvas-item overlay, just like before, but instead of
using an impromptu implementation to render the preview, we use
gegl:transform. We properly adjust the matrix passed to the op
according to the display scale, so that we still render only as
much as needed.
This is both notably faster than the current code, and, for
perspective transforms, more accurate.
This reverts commit 36258a671a.
This commit was making the rotated canvas rendering quite horrible to
the point that I think it would make the canvas rotation feature barely
usable. See bug 759287, comments 13 to 18.
I think we will need to find other ways to accelerate rendering.
Compromise on quality is possible, but I think that in this case, this
was more than just a compromise. It was more like completely abandonning
quality. We could even see the lines "spiking" while you were rotating!
Like your drawing was alive!
Improve the disabling/enabling of extended input events for the
canvas during enter/leave-notify events, in particular, so that
enter-notify events that are a result of pointer ungrabbing don't
erroneously reeanble extended input events.
Something about the unqueueing and requeueing of the entire event
queue during motion compression fries GTK's brain w.r.t. extended
input events. Instead, have gimp_display_shell_compress_motion()
return the first non-compressed event to the caller, making it
responsible for dispatching it after handling the motion event.
...outside area of Crop Tool -> Highlight option
Add "highlight-opacity" property and turn the controlling GUI into an
expanding toggle that reveals an opacity slider.
After commit 8029508fbe, we always
render the image in chunks that are at most
GIMP_DISPLAY_RENDER_BUF_WIDTH x GIMP_DISPLAY_RENDER_BUF_HEIGHT,
even when the window's scale factor is > 1.
Replace the "lock brush size to zoom" paint option with a "lock
brush to view" option, which links the entire brush transform to
the view transform, so that the brush remains invariant in display
space under scaling, rotation, and reflection.
When you move an endpoint in the Blend Tool, angle and distance
information are especially important, in case you want to draw a
gradient with specific values.
Currently Blend tool only shows the vector coordinates whose usefulness
is a bit of a question. Now it will also show distance (in current shell
unit) and angle!
Add an offset_angle parameter to gimp_constrain_line(), which
offsets the radial lines by a given angle.
Add gimpdisplayshell-utils.[ch], with two new functions:
- gimp_display_shell_get_constrained_line_offset_angle():
Returns the offset angle to be passed to
gimp_constrain_line(), in order to constrain line angles in
display space, according to the shell's rotation angle and
flip mode.
- gimp_display_shell_constrain_line(): A convenience function
which calls gimp_constrain_line() with the said offset angle.
Use the new functions in all instances where we constrain line
angles, so that angles are constrained in display space, rather
than image space.
The only exception is GimpEditSelectionTool, which keeps
constraining angles in image space, since it's not entirely obvious
that we want to constrain angles of dragged layers/selections in
display space.
Add gimp_display_shell_[un]transform_with_scale(), which are
similar to gimp_display_shell_[un]transform(), however, they
transform the bounding box to/from uniformly-scaled image space,
given the scale factor as a parameter. These functions are more
accurate than using gimp_display_shell_[un]transform() and applying
the scaling separately, in particular, when the scale matches the
(horizontal or vertical) display scale.
Use these functions in gimp_display_shell_draw_image(), to avoid an
off-by-one error when transforming screen-space chunks to image-
space chunks, which leads to the symptoms described in the bug.
Fix another potential off-by-one error affecting non-uniformly
scaled images, and window scale factors other than 1.
Use CAIRO_FILTER_FAST when painting the xfer surface to the
screen. This notably improves performance when the canvas is
rotated, at the cost of lower filtering quality.
Based on a patch by Massimo.
Move the entire image-space/screen-space transformation logic from
gimp_display_shell_render() to gimp_display_shell_draw_image(), so
that the former works entirely in image space, and do the chunking
and clipping in screen-space, making sure that image-space chunks
are never larger than
GIMP_DISPLAY_RENDER_BUF_WIDTH x GIMP_DISPLAY_RENDER_BUF_HEIGHT,
even when the window's scale factor is greater than 1.
Add a GIMP_BRICK_WALL environment variable, which, when set, shows
the screen-space chunk bounds.
...is a regression in common cases
Commit the free select tool on double click inside the polygon.
Done by implementing GimpCanvasItem::hit() in GimpCanvasPolygon, using
ugly code.
Update the dprod production of generated enum files to include
abbreviated value descriptions, as per the previous commits.
Add a comment for translators above the abbreviated descriptions,
specifying the full description they abbreviate.
Now add also flip information in the status bar so that one knows that
the canvas is flipped horizontally and/or vertically. Especially if you
often flip and rotate the canvas (or if you did it by mistake), at some
point, it may become confusing to remember whether this is the case. Now
it will be possible to check in a single glimpse at the status bar.
Similarly to what I previously did for the rotation information, hitting
the flip icons in status will allow to unflip easily without having to
go in menus or remember all shortcuts.
These information will be visible only when the canvas is flipped or
rotated.
In GimpCanvasTransformPreview, use the transform matrix to
determine if we're doing a perspective transform, rather than
relying on a separate property, so that we don't use the slow
perspective path unnecessarily.
Consequently, remove the does_perspective member of
GimpTransformTool, since it's no longer used.
Return FALSE from gimp_display_shell_has_filter() when there are
filters, but they're all disabled, to avoid unnecessary extra
color conversions during rendering.
When we have display filters, break the color profile transform in
two: first, convert from the image profile to sRGB, then apply the
filters, then convert from sRGB to the monitor profile.
When a display filter's configure() function returns NULL, use a
propgui for the filter, instead of not showing a widget at all, to
spare filters the need to manually construct a configuration gui.
When processing display filters, shift the filter buffer to the
top-left corner of the render area, and pass the actual render
area, instead of an area whose top-left coords are (0, 0), to the
display filter. This allows for position-dependent display
filters.
Change gimp_tool_set_active_modifier_state() to honor the new
GimpToolControlSetting. Explicitly set the mode to SEPARATE in
all tools that require modifier keys during a stroke.
And here comes the actual fix: change GimpTransformTool and
GimpToolTransformGrid to use SAME mode, and remove their
active_modifer_key() and hover_modifier() impls, so it makes no
difference whether a modifier is pressed before of after mouse button
press/release.
Allow propgui constructors to specify an (optional) callback function
when creating pickers, to be called when a color/coordinate is picked,
similarly to controller callbacks.
Implement picker callback support in GimpFilterTool. When the active
picker has an associated callback function, call it instead of the
class's color_picked() function.
Add lots of "#include <gegl.h>" to .c files that miss it, which is
now necessary, since this commit adds a Babl* parameter in
propgui-types.h.
Add parameters, controlling the behavior and appearance of sliders,
to GimpControllerSlider. The macro GIMP_CONTROLLER_SLIDER_DEFAULT
expands to a nonmodifiable lvalue of type GimpControllerSlider,
whose members are initialized with the most common default values.
Handle the new parameters in GimpToolLine. A slider using the new
"autohide" mode is only visible when selected, or when the cursor
is close enough to the line, between the slider's min and max
values, and no other handle is grabbed or hovered-over.
... which is emitted when a handle is single/double/tripple clicked.
The signal handler returns a boolean value. A return value of TRUE
stops further event processing, while a return value of FALSE allows
it.
The signal is emitted when a slider is dragged away from the line,
and will be removed when the button is released, and when the
slider is dragged back to the vicinity of the line, and won't be
removed. The last parameter of the signal is a boolean flag
differentiating between the two cases.
Note that a remove-slider signal may be emitted without a preceeding
prepare-to-remove-slider signal, however, is a prepare-to-remove-
slider signal is emitted with a TRUE last parameter, it must be
eventually followed by a remove-slider signal, or by another
prepare-to-remove-slider signal with a FALSE last parameter.
Add support for adding and removing sliders to/from a GimpToolLine,
using three new signals:
- can-add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, and returns a boolean
value, indicating whether a slider can be added at that
location.
- add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, for which can-add-slider
returned TRUE. In response, should add a new slider at that
location, and return its index, or a negative value if no
slider was added.
- remove-slider: Takes a slider index. In response, may remove
the slider.
On the UI side, when the cursor is close enough to the line, but
not within the hit area of an existing handle, GimpToolLine checks
if a slider can be added at the cursor position, using can-add-
slider. If a slider can be added, a dashed circle appears at the
cursor position along the line, indicating where a slider will be
added. The cursor is added by clicking, which emits an add-slider
signal; if the signal returns a slider index, the new slider is
selected, and can be subsequently dragged.
Removing a slider is done by either selecting the slider and
pressing backspace (or delete, although we don't actually forward
it to the tool atm,) or by "tearing" the slider: when dragging
the slider, if the cursor is far enough from the liner, a dashed
circle appears around the slider, and releasing the mouse removes
the slider.
