Add a new GimpCanvasLimit canvas item, which draws an area limit
for different shapes. It will be used by the following commits to
implement GimpToolFocus.
(cherry picked from commit 06a2b4f338)
Add a new GimpToolTransform3DGrid tool widget, subclassed from
GimpToolTransformGrid, which can be used to perform 3D
transformations.
The widget can be in one of three modes:
CAMERA - allows adjusting the primary vanishing point by moving a
handle.
MOVE - allows moving the object through dragging.
ROTATE - allows rotating the object through dragging.
By default, controlling the transformation through dragging applies
to the X and Y axes. Holding Shift (or setting the "constrain-
axis" property) restricts the motion to only one of the axes.
For the MOVE and ROTATE mode, holding Ctrl (or setting the "z-axis"
property) allows controlling the Z axis instead.
For the same modes, holding Alt (or setting the "local-frame"
property), applies the adjustments in the object's local frame of
reference, instead of the display's global frame of reference.
In GimpToolTransformGrid, allow setting "inside-function" and
"outside-function" to a new NONE value, performing no
transformation when dragging the respective area.
Add an "orientation" property to GimpToolCompass, which can be one
of "auto", "horizontal", or "vertical", and which controls the
orientation of the line against which the angle is measured, when
not in 3-point mode (previously, the line would always be
horizontal.) When "orientation" is "auto", the orientation is
automatically set to either horizontal or vertical, such that the
measured angle is <= 45 deg.
Keep the line horizontal, or vertical, in display-space, rather
than in image-space, so that the compass works correctly even when
the canvas is rotated and/or flipped.
Fix the compass's behavior when the image's horizontal and vertical
resolutions are different, both with and without dot-for-dot.
Add "pixel-angle" and "unit-angle" read-only properties, which
return the measured angle either with or without taking the image's
resolution into account, respectively. These properties will be
used by the measure tool in the next commit, instead of having it
implement its own angle calculation.
(cherry picked from commit d2f33cf1be)
... which takes the same arguments as GimpToolWidget::hover(), and
performs a hit-test, returning one of the following values:
- GIMP_HIT_DIRECT: The point corresponds to one of the widget's
elements directly.
- GIMP_HIT_INDIRECT: The point does not correspond to one of the
widget's elements directly, but the widget otherwise responds
to press events at this point.
- GIMP_HIT_NONE: The widget does not respond to press events at
this point.
Unlike hover(), hit() should not have any side effects.
(cherry picked from commit 385203f4d6)
You can now set any paint tool to mirror painting relatively
horizontal/vertical axis or a central point (any combination of these 3
symmetries).
This has been implemented as a new multi-stroke core, where every stroke
is actually handled as a multi-stroke (default of size 1).
This is also the first usage of custom guides for symmetry guiding.
Current version has to be activated in the playground.
In order to make a clear separation between the core modules and the
UI modules, move the necessary enums from display-enums.h and
widgets-enums.h to config-enums.h and the files
gimpdisplayoptions.[ch] from the display to the config module. This
removes the config -> display dependency.
This change has three main benefits
* It lets us remove includes of display files from the config module
* We don't have to link gimp-console and test-config with a subset of
object files from the display module
* It is reflected in devel-docs/gimp-module-dependencies.svg that the
application is made up of core modules and UI modules and that no
core module depends on any UI module
2009-01-17 Michael Natterer <mitch@gimp.org>
* all files with a GPL header and all COPYING files:
Change licence to GPLv3 (and to LGPLv3 for libgimp).
Cleaned up some copyright headers and regenerated the parsers in
the ImageMap plugin.
svn path=/trunk/; revision=27913
zoom-focus better
* app/display/display-enums.h: Added
GIMP_ZOOM_FOCUS_RETAIN_CENTERING_ELSE_BEST_GUESS.
* app/display/gimpdisplayshell-scale.c
(gimp_display_shell_scale_get_zoom_focus): Take the new enum into
account; if the image is centered, keep it centered, else use the
best-guess method.
* app/actions/view-commands.c (view_zoom_explicit_cmd_callback):
Use the new enum for explicit zooming.
* app/display/display-enums.c: Regenerated.
svn path=/trunk/; revision=27653
2008-11-06 Sven Neumann <sven@gimp.org>
* tools/gimp-mkenums: use NC_() to mark enum values for
translation.
Use a lower-case short form of the type name as translation
context.
* libgimp/libgimp-intl.h: define the NC_() macro as noop.
* libgimpbase/gimpbasetypes.[ch]
* libgimpbase/gimpbase.def: added new functions to set and
get a translation context on an enum type.
* app/base/Makefile.am
* app/core/Makefile.am
* app/display/Makefile.am
* app/paint/Makefile.am
* app/plug-in/Makefile.am
* app/text/Makefile.am
* app/tools/Makefile.am
* app/widgets/Makefile.am
* libgimp/Makefile.am
* libgimpbase/Makefile.am:
* libgimpconfig/Makefile.am
* libgimpthumb/Makefile.am
* libgimpwidgets/Makefile.am: register the translation context
with the enum types.
* app/display/display-enums.h
* libgimpbase/gimpbaseenums.h
* libgimpconfig/gimpcolorconfig-enums.h: removed old-style
explicit
translation context.
* app/base/base-enums.c
* app/core/core-enums.c
* app/display/display-enums.c
* app/paint/paint-enums.c
* app/plug-in/plug-in-enums.c
* app/text/text-enums.c
* app/tools/tools-enums.c
* app/widgets/widgets-enums.c
* libgimpbase/gimpbaseenums.c
* libgimpconfig/gimpcolorconfig-enums.c
* libgimpwidgets/gimpwidgetsenums.c: regenerated.
svn path=/trunk/; revision=27562
to 100%
* app/display/display-enums.h: Added a GimpZoomFocus enum with
'best guess', 'pointer' or 'image center' values.
* app/display/gimpdisplayshell-scale.[ch]
(gimp_display_shell_scale): Take a GimpZoomFocus parameter and
pass it on to
(gimp_display_shell_scale_get_zoom_focus): which returns the
requested zoom focus point if one was given, else makes a best
guess.
* app/actions/view-commands.c
* app/display/gimpstatusbar.c
* app/display/gimpnavigationeditor.c
* app/display/gimpdisplayshell-callbacks.c
* app/display/gimpdisplayshell-scale-dialog.c: For explicit-zoom
commands like "zoom to 100%", always use the image center as the
zoom focus point. For all other zooming, continue to use the
best-guess method.
* app/display/display-enums.c: Regenerated.
svn path=/trunk/; revision=27104
2008-08-20 Michael Natterer <mitch@gimp.org>
Bug 496772 – Position shown in the statusbar needs more
precision (for some tools)
* app/display/display-enums.[ch]: add enum GimpCursorPrecision
which can be one of { PIXEL_CENTER, PIXEL_BORDER, SUBPIXEL }.
* app/display/gimpdisplayshell-cursor.[ch]: add "precision"
parameter to gimp_display_shell_update_cursor() and pass it
on to the statusbar.
* app/display/gimpstatusbar.[ch]: add "precision" parameters to
the cursor coordinates APIs, offset the passed coords accordingly
and display them with one decimal point if SUBPIXEL is requested
and the display's unit is PIXEL. Keep a second floating-point
format string around at any time.
* app/tools/gimptoolcontrol.[ch]: add a "precision" member and API
so tools can configure the precision they need. Defalt to
PIXEL_CENTER since that's right for almost all tools.
* app/display/gimpdisplayshell-callbacks.c: pass the tool's
precision to gimp_display_shell_update_cursor().
* app/tools/gimptool.[ch]: add "precision" parameter to
gimp_tool_push_status_coords() and pass it on to the statusbar.
* app/tools/gimpaligntool.c
* app/tools/gimpblendtool.c
* app/tools/gimpcolortool.c
* app/tools/gimpcroptool.c
* app/tools/gimpeditselectiontool.c
* app/tools/gimpfliptool.c
* app/tools/gimpfreeselecttool.c
* app/tools/gimpmovetool.c
* app/tools/gimppainttool.c
* app/tools/gimpperspectiveclonetool.c
* app/tools/gimprectangleselecttool.c
* app/tools/gimprectangletool.c
* app/tools/gimptransformtool.c
* app/tools/gimpvectortool.c: set precision in init() where
needed. Adjust the precision in the fly when needed, e.g. while
moving guides or when toggling hard-edge on paint tools. Also pass
an appropriate precision to gimp_tool_push_status_coords(), which
is not always the tool's precision as used for cursor display.
svn path=/trunk/; revision=26681
2006-09-08 Sven Neumann <sven@gimp.org>
* app/config/gimpdisplayconfig.[ch]
* app/config/gimprc-blurbs.h
* app/display/display-enums.[ch]: added new gimprc option
"space-bar-action" and default to "pan". Will add a GUI for this later.
* app/display/gimpdisplayshell-callbacks.c: respect the new option
and either pan the display or push the move tool. Fixes bug #349903.
2004-06-22 Michael Natterer <mitch@gimp.org>
* app/actions/view-actions.c
* app/actions/view-commands.[ch]: added actions & callbacks to
configure the canvas padding color.
* app/widgets/gimphelp-ids.h
* menus/image-menu.xml.in: added the actions' help IDs and menu entries.
* app/display/display-enums.h: added /*< skip >*/'ed enum value
GIMP_CANVAS_PADDING_MODE_RESET.
* app/display/gimpdisplayshell-appearance.c
* app/display/gimpdisplayshell-callbacks.[ch]
* app/display/gimpdisplayshell-handlers.c
* app/display/gimpdisplayshell.[ch]: removed the canvas padding
button and its popup menu (fixes bug #142996). Instead, added a
toggle button which allows to zoom the image when the window is
resized (as known from sodipodi, except it doesn't work as nice
yet :-) improvements to the algorithm are welcome).
Cleaned up the GimpDisplayShell struct a bit and renamed some
of its members.
* libgimpwidgets/gimpstock.[ch]
* themes/Default/images/Makefile.am
* themes/Default/images/stock-zoom-follow-window-12.png: added new
icon for the new display toggle button.
2003-10-22 Sven Neumann <sven@gimp.org>
* app/display/Makefile.am
* app/display/gimpdisplayoptions.[ch]: new files that implement
a GimpConfig object with GimpDisplayShell and GimpCanvas options.
Actually two classes, one for the normal view, a derived one with
different default values for fullscreen mode.
* app/display/display-enums.[ch]: renamed GimpDisplayPadding enum
to GimpCanvasPadding.
* app/config/config-types.h: added the GimpDisplayOptions typedef.
* app/config/gimprc-blurbs.h
* app/config/gimpdisplayconfig.[ch]: replaced a bunch of properties
with two instances of GimpDisplayOptions.
* app/display/gimpdisplayshell.[ch]: replaced the
GimpDisplayShellAppearance struct with GimpDisplayOptions.
* app/display/gimpdisplayshell-appearance.[ch]
* app/display/gimpdisplayshell-callbacks.c
* app/display/gimpdisplayshell-handlers.[ch]
* app/gui/image-menu.c: changed accordingly.
* app/gui/preferences-dialog.c: added a convenience function that
creates a view on a GimpDisplayOptions object. Not all values are
configurable here yet.
* docs/gimprc-1.3.5.in
* etc/gimprc: regenerated to document the gimprc format changes.
2002-11-23 Michael Natterer <mitch@gimp.org>
* app/config/gimpconfig-utils.[ch]: removed
gimp_config_values_equal().
* app/config/gimpconfig-serialize.c
* app/config/gimpconfig.c: use g_param_values_cmp() instead so
our registered compare methods are used.
* app/config/gimpdisplayconfig.[ch]: added "canvas_padding_mode"
and "canvas_padding_color" properties.
* app/display/display-enums.[ch]: added enum GimpDisplayPaddingMode
which can be one of { theme, light check, dark check, custom }.
* app/display/gimpdisplay.h
* app/display/gimpdisplay-handlers.c: removed cached monitor
resolution values...
* app/display/gimpdisplayshell.[ch]: ...and added them here. Added
padding state as in GimpDisplayConfig. Added utility function
gimp_display_shell_set_padding() which hides all the details.
Added the new padding modes to the padding color button's context
menu.
* app/display/gimpdisplayshell-callbacks.[ch]: don't fiddle
with colors manually but use gimp_display_shell_set_padding()
in realize() and in the color button callbacks.
* app/display/gimpdisplayshell-handlers.c: connect to
notify::monitor-[xy]resolution and
notify::canvas-padding-[mode|color] and update accordingly.
* app/widgets/gimppropwidgets.[ch]: added
gimp_prop_color_button_new().
* app/widgets/gimpdialogfactory.[ch]: added
gimp_dialog_factories_session_clear() (unimplemented).
* app/gui/preferences-dialog.c: added widgets for padding mode and
color. Removed some callbacks by connecting the functions they
called directly. Cleanup.
2002-03-17 Sven Neumann <sven@gimp.org>
* libgimpwidgets/gimpwidgets.[ch]: new function to set the sensitivity
of an option_menu.
* app/base/base-enums.[ch]: register and describe GimpHistogramChannel.
* app/core/Makefile.am
* app/core/core-enums.[ch]: build with gimp-mkenums, added core-enums.c
to CVS, added descriptions for GimpPreviewSize.
* app/display/Makefile.am
* app/display/display-enums.[ch]: build with gimp-mkenums, added
display-enums.c to CVS, added descriptions for GimpCursorMode.
* app/gui/preferences-dialog.c: more GimpEnumMenus.
* app/tools/gimpcurvestool.c
* app/tools/gimphistogramtool.c
* app/tools/gimplevelstool.c: use a GimpEnumMenu for the Channel menu.
Allow alpha channel in HistogramView. These tools needs more work...
