2000-11-03 Not Zed <NotZed@HelixCode.com>
* e-tree-model.c (e_tree_model_node_insert): Since we insert at
the parent->child position, we need to account for expanded nodes
above this node to properly calculate the absolute row position of
the node.
(e_tree_model_node_insert): If we're inserting at the end of this
node, then we just use the position directly.
(e_tree_model_node_remove): Completely rewritten. Now we delete
all nodes at once, which should be >> faster, unfortunately still
have to signal each removal, which is >> SLOW :( Its still about
2-3x faster than it was (for 25K nodes).
(child_free): Free all data/subnodes of a given path, no
unlinking.
(e_tree_model_node_remove): If we are removing a lot of nodes
[>1000 or >1/4 total nodes], then use model_changed, rather then
removing each node. Yay. Now its about 500x faster than it was,
for 25K nodes.
(etree_pre_change): Signal handler, so we can find out when we are
in a pre-change state.
(etree_changed): Likewise to find when we have finished.
(e_tree_model_construct): Link to the model*changed signals so we
know when we are in pre/changed state.
(e_tree_model_node_insert): Only perform a row_inserted if not in
pre_change state. Another significant speed improvement (200-500%)
on big trees.
(e_tree_model_node_remove): Do not emit row_deleted (or
model_changed), if we are in the pre_change state.
(add_visible_descendents_to_array): Likewise for row_inserted.
(e_tree_model_node_sort): And here too, for consistency.
svn path=/trunk/; revision=6363
2000-11-02 Christopher James Lahey <clahey@helixcode.com>
* e-table-config.glade, e-table-config.glade.h: Updated these
unused glade files to better match the versions in the code.
* e-table.c, e-table.h: Added e_table_selected_count and
"selection_change" signal.
* e-tree-model.c: Fixed an out of order
svn path=/trunk/; revision=6354
2000-10-27 Not Zed <NotZed@HelixCode.com>
* e-tree-model.c (e_tree_model_node_insert): If we are inserting
into the root level, we dont have to search the whole array for a
parent node we'll never find.
svn path=/trunk/; revision=6218
2000-10-25 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c (e_tree_model_node_remove): remove the save_id
here, so we don't save state for nodes that no longer exist.
(etree_destroy): remove the foreach, since all the save_id's
should have been removed by now (don't destroy a tree without
destroying the root node.) also, make sure to call
g_hash_table_destroy.
svn path=/trunk/; revision=6202
2000-10-24 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c: make ETreeModel opaque, and switch from using
g_new0 and g_free for ETreePath's to using g_mem_chunk routines.
(e_tree_model_node_remove): free the path's save_id. *
(e_tree_model_set_expanded_default): add method to add default
expanded status for parent nodes.
(etree_set_expanded_recurse): make this more efficient.
e-tree-model.h: make ETreeModel opaque. add prototype for
e_tree_model_set_expanded_default.
svn path=/trunk/; revision=6156
2000-10-15 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c (e_tree_model_node_traverse): get the next child
before traversing/calling func.
svn path=/trunk/; revision=5937
2000-10-15 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c: get rid of ENode type, as everything in it is
now in ETreePath, and add parent/sibling/child pointers to
ETreePath. everywhere where GNode/ENode were used, we just use
ETreePath now.
(e_tree_path_depth): new function.
(e_tree_path_insert): new function.
(e_tree_path_unlink): new function.
(e_tree_model_node_traverse): new function.
(etree_get_first_child): new virtual function impl.
(etree_get_last_child): same.
(e_tree_model_class_init): fill in function pointers for
get_first_child/get_last_child.
(e_tree_model_node_get_first_child): new function.
(e_tree_model_node_get_last_child): new function.
(e_tree_model_node_depth): g_node_depth -> e_tree_path_depth.
(e_tree_model_node_insert): modify to use ETreePath and new
e_tree_path functions. Prepends and appends are now both constant
time.
(child_remove): modify for e_tree_model_node_traverse.
(e_tree_model_node_remove): same, and use e_tree_path functions.
(e_tree_model_node_insert_before): add a loop here to figure out
the position, since it's the only place we care about the child
position.
(e_tree_model_node_sort): rework to accomodate new e_tree_path
functions, and put the e_tree_model_node_set_expanded calls in a
separate loop after all the children have been added.
* e-tree-model.h: add prototypes and virtual functions for more
tree traversal operations (get_first_child, get_last_child), as
well as a new function to traverse depth first the descendents of
a node (e_tree_model_node_traverse), much like g_node_traverse
(G_IN_ORDER). Also, ETreePath is an opaque type now, and is not a
GNode.
svn path=/trunk/; revision=5932
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* tests/test-tree-1.c, tests/test-tree-2.c, tests/test-tree-3.c:
Changed these to match the new ETable system.
* gal/Makefile.am: Added e-table-column-specification.lo,
e-table-extras.lo, e-table-specification.lo, and e-table-state.lo.
From gal/e-table/ChangeLog:
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added e-table-column-specification.c,
e-table-column-specification.h, e-table-extras.c,
e-table-extras.h, e-table-specification.c,
e-table-specification.h, e-table-state.c, and e-table-state.h.
Removed some duplicated .h files.
* e-cell-tree.c: Ref, sink, and unref the subcell instead of destroying
it when done.
* e-table-column-specification.c, e-table-column-specification.h:
New class which describes a column without having a table get
instantiated.
* e-table-config.c: Changed get_specification to get_state to get
this to compile.
* e-table-defines.h, e-table-item.h: Moved the definition of
ETableCursorMode from e-table-item.h to e-table-defines.h.
* e-table-extras.c, e-table-extras.h: New class which acts as a
set of 3 hash tables. All from char * and to alternately, ECells,
GCompareFuncs, and GdkPxibufs.
* e-table-scrolled.c, e-table-scrolled.h: Changed this to match
the new ETable function declarations.
* e-table-sort-info.c, e-table-sort-info.h: Added functions for
saving to and loading from xml.
* e-table-specification.c, e-table-specification.h: New class
which describes a table without having to instantiate it.
* e-table-state.c, e-table-state.h: New class which describes the
state of a table without having to instantiate the table.
* e-table.c, e-table.h: Changed this to accept both a state and a
specification instead of just a specification. You then save only
the state. The specification stays exactly the same. Also, you
no longer need to pass in an ETableHeader. Most of the
information contained in the ETableHeader are in the
specification. However you may need to translate some of the
strings in the specification to objects. If you need anything
other than the builtin choices, you need to create an ETableExtras
and pass it in.
* e-tree-model.c: Removed an unused variable.
svn path=/trunk/; revision=5837
2000-10-04 Not Zed <NotZed@HelixCode.com>
* e-table-sorted-variable.c (etsv_add): Changed to take into
account the sort group, if the table has one.x
(etsv_insert_idle): Clear the insert count if we hit an idle loop.
(etsv_sort_idle): Reset the insert count if we perform a sort.
(etsv_add): If we are adding a lot (>ETSV_INSERT_MAX) items,
without hitting an idle loop, assume we're better off performing a
sort instead. Use another idle handler to reset the count.
2000-10-03 Not Zed <NotZed@HelixCode.com>
* e-table-sorted-variable.c (etsv_sort_by_group): Sort based on
the sort_group stuff.
* e-tree-model.c (e_tree_init): Setup the group sort info string.
(etree_destroy): And free it.
(build_sort_group): Build a string for this node.
2000-09-29 Not Zed <NotZed@HelixCode.com>
* e-cell-tree.c (e_cell_tree_get_node): Changed to take the source
model, not the tree model. The source model may be a subset, and
it needs to remap the rows for us.
(ect_draw):
(ect_event):
(ect_max_width):
(ect_print): Changed callers.
* e-table-sorted-variable.c (etsv_sort_subset):
(etsv_sort_build_subset):
(etsv_sort_free_subset): Functions to perfom grouping of sorts for
sorts that have row_sort_group returning useful info.
(etsv_sort): Use the complex sort routines if we need to.
* e-table-model.c (e_table_model_row_sort_group): Return a sort-id
for a given row.
(e_table_model_has_sort_group): Return if the sort-id provides any
useful information.
svn path=/trunk/; revision=5705
2000-10-02 Chris Toshok <toshok@helixcode.com>
* e-tree-model.h: change/add prototypes and a typedef for
ETreePathCompareFunc.
* e-tree-model.c (e_tree_model_node_set_compare_function): new
function, used to set the comparison function for sorted nodes.
Eventually sorting entail just calling this function, with the
tree maintaining the sort.
(e_tree_model_node_sort): use a helper function
(e_tree_model_node_compare) to allow the e-tree user's comparison
function to take mode reasonable paramaters. also, fix it so the
previous expanded state is kept with the node. i can't believe i
wrote it the way it originally was. also, don't take the
comparison function here. it's set in
e_tree_model_node_set_compare_function.
svn path=/trunk/; revision=5674
2000-10-02 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c (e_tree_model_node_sort): don't screw things up
if we sort a collapsed node.
svn path=/trunk/; revision=5673
2000-10-02 Chris Toshok <toshok@helixcode.com>
* tree-expanded.xpm: reinstate file.
* tree-unexpanded.xpm: same.
* e-tree-example-1.c (main): remove calls to e_cursor_*, and don't
create pixbufs. let's the tree give us the defaults.
* e-tree-model.c (e_tree_model_node_changed): call
e_table_model_row_changed on the node's row (if it's visible).
(e_tree_model_node_inserted): call e_table_model_row_inserted on
the new node's row, if it's visible.
(e_tree_model_node_removed): call e_table_model_row_removed on the
old node's row, if it was visible.
* e-cell-tree.c (e_cell_tree_construct): allow open_pixbuf and
closed_pixbuf to be NULL, and default them to the xpm data in
rtee-{un}expanded.xpm.
(ect_destroy): call gdk_pixbuf_unref on our open/closed pixbufs.
* tree-expanded.xpm, tree-unexpanded.xpm: make the + and - a
little lighter than straight black.
svn path=/trunk/; revision=5660
2000-09-25 Chris Toshok <toshok@helixcode.com>
* gal/e-table/e-tree-model.h: add save_state stuff to ETreeModel, and
prototypes for the public methods.
* gal/e-table/e-tree-model.c: add save_id to the ENode.
(expanded_remove_func): new function, iterator to delete the save
id's.
(etree_destroy): iterate over expanded_state.
(etree_set_expanded): if the node has a save id, make sure to
update both the collapsed and expanded counts.
(e_tree_model_node_insert_id): convenience function that inserts a
node and sets its id.
(e_tree_model_node_sort): remove extra spew.
(save_expanded_state_func): new function, iterator for saving
expanded state.
(e_tree_model_save_expanded_state): new function.
(get_string_value): helper function for loading.
(e_tree_model_load_expanded_state): new function.
(e_tree_model_node_set_save_id): sets the save id for a node,
adding it to the hashtable if it's not already there. if the id
was there previously, set the expanded flag of the node
accordingly.
svn path=/trunk/; revision=5573
2000-09-24 Chris Toshok <toshok@helixcode.com>
* e-tree-model.c (e_tree_model_node_sort): fix sorting - need to
update the row_array as well as the actual structure of the
GNodes.
svn path=/trunk/; revision=5564
2000-09-01 Chris Toshok <toshok@helixcode.com>
* e-tree-model.h: add signals/prototypes for
e_tree_model_node_collapsed and e_tree_model_node_expanded.
* e-tree-model.c (etree_set_expanded): emit
node_expanded/node_collapsed signals, with node_expanded happening
before the expansion so it can much with the children, and
collapsed being emitted after.
(e_tree_model_row_of_node): remove stupid check, and g_warning.
(e_tree_model_node_collapsed): new function.
(e_tree_model_node_expanded): new function.
svn path=/trunk/; revision=5162
2000-08-22 Christopher James Lahey <clahey@helixcode.com>
* e-cell-text.c, e-cell-toggle.c, e-cell-tree.c, e-table-item.c:
Moved drawing of the cell backgrounds from ECell into ETableItem.
* e-tree-model.c: Include stdlib.c.
svn path=/trunk/; revision=4915
2000-08-21 Chris Toshok <toshok@helixcode.com>
* e-tree-example-1.c (remove_node): we can remove nodes with
children now.
* e-tree-model.h: add prototype for e_tree_model_node_sort.
* e-tree-model.c (etree_set_expanded): if the node is invisible,
just set its expanded flag and return.
(e_tree_model_root_node_set_visible): call set_expanded before we
remove it from the row array or else the aforementioned change
will result in nothing happening.
(e_tree_model_node_insert): use a position of -1 as "append".
(e_tree_model_node_insert): if the model was marked with
root_visible == FALSE, make sure to set it's expanded flag to TRUE
when the root node is inserted.
(e_tree_model_node_sort): new function.
svn path=/trunk/; revision=4912
* e-tree-model.c (e_tree_model_node_insert): When inserting a root
node, only call e_table_model_row_inserted if root_visible.
(e_tree_model_node_remove): Call e_table_model_row_deleted before
removing the row from the row_array, because the chain of signal
handlers will sometimes need that info.
svn path=/trunk/; revision=3994
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* widgets/e-text/e-text.c: Calculate height including if
clip_height is set to -1.
From addressbook/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
addressbook/gui/component/e-cardlist-model.c: Added
value_to_string handlers.
* demo/addressbook-widget.c, demo/demo.c: Removed usage of "x" and
"y" arguments.
* addressbook/gui/component/addressbook.c: Activated Click To Add
and set the click to add message.
* addressbook/gui/component/e-addressbook-model.c: Added
value_to_string and append_row handlers.
* addressbook/gui/component/e-select-names.c: Added a column.
From calendar/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* gui/calendar-model.c: Added an #ifdefed value_to_string handler
assignment.
From camel/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* providers/mbox/camel-mbox-summary.c: Added debugging
information.
From composer/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added e-msg-composer-select-file.h for make
distcheck.
From e-util/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added e-canvas-vbox.c and e-canvas-vbox.h.
* e-canvas-vbox.c, e-canvas-vbox.h: New canvas object to act like
a vbox using the reflow system.
From mail/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Added a value_to_string handler.
From shell/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* glade/Makefile.am: Added EXTRA_DIST for make distcheck.
From widgets/e-table/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added e-table-click-to-add.c,
e-table-click-to-add.h, e-table-one.c, and e-table-one.h.
* e-table-click-to-add.c, e-table-click-to-add.h: A new canvas
item that represents a single row that sometimes exists. It's for
adding new rows to your table.
* e-table-example-1.c, e-table-example-2.c, e-table-size-test.c,
test-check.c, test-cols.c, test-table.c: Added value_to_string handlers.
* e-table-group-container.c: Use value_to_string to make grouping
not crash for non string columns. Made some changes to work
properly in an ECanvasVbox.
* e-table-group-leaf.c, e-table-item.c: Made some changes to work
properly in an ECanvasVbox.
* e-table-model.c, e-table-model.h: Added append_row and
value_to_string methods.
* e-table-one.c, e-table-one.h: Given a source ETableModel, this
provides a single row model that uses the initialize_value,
duplicate_value, free_value, and value_is_empty methods of the
original source to implement set_value and value_at (and proxies
most of the other methods.) This is used for ETableClickToAdd.
* e-table-simple.c, e-table-simple.h: Added append_row and
value_to_string handlers. append_row uses a GtkArg instead of a
parameter to e_table_simple_new.
* e-table-subset.c: Added append_row and value_to_string handlers.
* e-table.c, e-table.h: Use a vbox containing an ETableClickToAdd
and an ETableItem instead of an ETableItem directly. Only show
the ETableClickToAdd if the top level of the xml SPEC has the
attribute click-to-add set to some non-zero integer.
(click-to-add="1"). Add a "click_to_add_message" argument.
* e-tree-model.c: Add a commented out value_to_string handler.
From widgets/meeting-time-sel/ChangeLog:
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added the include path to top_srcdir.
svn path=/trunk/; revision=3744
2000-06-23 Chris Toshok <toshok@helixcode.com>
* e-tree-model.h, e-tree-model.c: add icon_at virtual function -
it was stupid to make the insert call take 2 pixbufs. the model
should give this information.
* e-cell-tree.c: get rid of the opened/closed pixbuf stuff. call
e_tree_model_icon_of_node.
* e-tree-example-1.c: add my_icon_at.
* e-tree-simple.c (simple_icon_at): new function
(e_tree_simple_new): add icon_at parameter.
* e-tree-simple.h: add SimpleIconAtFn.
svn path=/trunk/; revision=3707
2000-06-23 Chris Toshok <toshok@helixcode.com>
* e-tree-example-1.c (create_tree): use the expanded/unexpanded
pixbufs as node pixbufs for the first level of children, to test
the drawing.
* e-tree-model.c (e_tree_model_node_get_closed_pixbuf): new function.
(e_tree_model_node_get_opened_pixbuf): same.
(e_tree_model_node_insert): add opened/closed pixbuf argument.
(e_tree_model_node_insert_before): same.
* e-tree-model.h: add prototypes for opened/closed pixbuf
accessors, and add them to the e_tree_model_node_insert_* calls.
* e-cell-tree.c (ect_draw): add opened/closed pixbuf drawing per node.
svn path=/trunk/; revision=3706
2000-06-10 Chris Toshok <toshok@helixcode.com>
* e-table-item.c (eti_event): change things so we focus the cell
and select the row, and also dispatch the event to that row/cell.
This fixes the problem with the tree where you had to click twice
to activate the tree controls.
* Makefile.am (libetable_a_SOURCES): remove e-tree-gnode.* and add
e-tree-simple.*
(icons): add tree-expanded.xpm and tree-unexpanded.xpm
* e-cell-tree.c (ect_enter_edit): defer to subcell's view.
(ect_leave_edit): defer to subcell's view.
(visible_depth_of_node): visual depth, taking into account that
the root node of the model might not be displayed.
(offset_of_node): return the offset used to shift the subcell
over.
(ect_draw): don't draw vertical lines if we're the leftmode node
(a visual root node). also, don't shift x2 by the subcell offset,
so we get ellipses like we're supposed to.
(ect_event): remove GDK_BUTTON_RELEASE from the list of events
that we care about.
* e-tree-example-1.c: lots of changes, a more dynamic UI so we can
test tree model api stuff.
* e-tree-gnode.c, e-tree-gnode.c: removed files, since their guts
have been rolled into e-tree-model.c
* e-tree-model.c, e-tree-model.h: substantially changed. too much
to really describe here. this should really be considered the
first revision of these files :)
* e-tree-simple.c, e-tree-simple.h: analogous to e-table-simple, a
subclass that allows the use of function pointers.
svn path=/trunk/; revision=3519
2000-06-08 Chris Toshok <toshok@helixcode.com>
* e-tree-gnode.c, e-tree-gnode.h: New files. A tree model using a
GNode structure to store it's info.
* e-tree-model.c, e-tree-model.h: New files. A proxy model
sitting between a table model and the real tree model (of which
ETreeGNode is an example).
* e-cell-tree.c, e-cell-tree.h: New files. A cell renderer
capable of wrapping up a subcell and drawing the tree controls for
expanding/collapsing trees.
* tree-expanded.xpm, tree-unexpanded.xpm: New files. the standard
+ and - icons.
* e-tree-example-1.c: New file, giving a (pretty poor :) example
of using ETreeGNode.
* Makefile.am: at the tree stuff to the build, and build
tree-example-1.
* .cvsignore: ignore tree-example-1.
svn path=/trunk/; revision=3483
