* camel-data-wrapper.c (camel_data_wrapper_is_offline): Virtualize
this.
* camel-medium.c (is_offline): A medium is offline if its content
object is offline.
* camel-multipart.c (is_offline): A multipart is offline if any of
its subparts are offline.
svn path=/trunk/; revision=12948
* gmime-content-field.[ch]: Remove this. It was only a thin
wrapper around struct _header_content_type anyway, and didn't
match the naming scheme of anything else.
* Makefile.am: Remove gmime-content-field.[ch]
* camel.h: Remove gmime-content-field.h
* camel-types.h: Add CamelContentType as a typedef for struct
_header_content_type (especially for use outside of camel).
* camel-multipart.c:
* camel-mime-part.c:
* camel-mime-message.c:
* camel-folder-summary.c:
* camel-folder-search.c:
* camel-data-wrapper.[ch]: Use CamelContentType and
header_content_type_* functions rather than the GMime stuff.
* camel-mime-part-utils.c:
* camel-medium.c: Remove unused gmime-content-field.h include.
svn path=/trunk/; revision=7186
2000-11-04 Not Zed <NotZed@HelixCode.com>
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Set the
preface/postface from the parser into the multipart object.
* camel-multipart.c (camel_multipart_set_postface): Function to
set the postface text on a multipart.
(camel_multipart_set_preface): Similarly for preface text.
* camel-mime-parser.c (folder_scan_content): If we scan until a
boundary, then we do not include the \n that starts the boundary
line in the content.
(struct _header_scan_stack): Added a ByteArray to store the
multipart pre/post-text as we're scanning.
(folder_pull_part): Free pre/posttext if they are allocated.
(folder_scan_step): Build into the pre/posttext arrays as we
encounter data.
(camel_mime_parser_preface): REturn the multipart preface text, if
there is any scanned.
(camel_mime_parser_postface): Likewise for postface text.
(byte_array_to_string): helper function for above.
* providers/mbox/camel-mbox-folder.c (mbox_append_message): Change
the from line to be "\nFrom ..." always, so no need to
check/append a \n to messages.
(mbox_append_message): Open the output stream with append mode
[assuming this is more efficient than seeking to the end]
And dont prepend \n on the From line if its the first in the
mbox.
(mbox_append_message): Pass the offset of the real start of the
"From " line when we perform the update (which may != 'seek')
* camel-mime-filter-charset.c (complete): Removed the terminating
NUL 'fix'.
* camel-stream-filter.c (do_read): Added some debug.
(do_flush): And here.
(do_write): And here too.
(do_write): ARGH!!! ARGH! Ok, so the filter stream was writing a
different number of bytes than the requester was asking it to
write (because of filtering, of course!). So instead of returning
the true number of written bytes, we'll return what they asked us
to write - unless there is an error in which case we return -1.
* camel-mime-utils.c (base64_encode_close): Sigh, forgot to make
it unsigned. I think this is actually a gcc bug as (48 >> 2)
somehow ended up negative, when it obviously should not, even if
the data load was signed.
svn path=/trunk/; revision=6388
* camel-mime-utils.c (base64_encode_step, base64_encode_close):
Take an additional argument, "break_lines", saying whether or not
to add '\n's to the output.
* camel-multipart.c (set_boundary):
* camel-mime-filter-basic.c (filter, complete): Update for base64
api change.
svn path=/trunk/; revision=6271
* camel-multipart.c (camel_multipart_init): Don't set a default
boundary. Require the caller to do that.
(set_boundary): if boundary is NULL, generate a "random" boundary.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Add a call to
camel_multipart_set_boundary after creating a new multipart.
svn path=/trunk/; revision=3217
2000-05-19 NotZed <NotZed@HelixCode.com>
* camel-simple-data-wrapper.c (construct_from_stream): If we
already have been constructed, unref our content.
(write_to_stream): Check we've been constructued, and change for
stream api changes.
* camel-mime-parser.c: Removed exception stuff.
* md5-utils.c (md5_get_digest_from_stream): repaired.
* camel-mime-message.c: Remove exception from write_to_stream, and
fix, and fix formatting.
* providers/sendmail/camel-sendmail-transport.c (_send_internal):
Fix for stream changes.
* providers/pop3/camel-pop3-store.c (camel_pop3_command): Fixes
for stream changes.
* providers/mbox/camel-mbox-folder.c, and elsewhere, fix all
stream api changes.
(mbox_append_message): Use stream_close() now its back.
(mbox_append_message): unref the from filter.
* camel-stream-mem.c: And here.
* camel-stream-fs.[ch]: Here too.
* camel-stream-filter.c: Likewise. This is getting tedious.
* camel-stream-buffer.c (stream_write): Fix a few little problems.
(stream_close): Reimplmeent.
(camel_stream_buffer_read_line): Slightly more efficient version,
that also only allocates the right amount of memory for strings.
* camel-seekable-substream.c: Likewise.
* camel-seekable-stream.[ch]: Remove exceptions, fix formatting,
changes for stream (re)fixes. set_bounds returns an error.
* camel-stream.[ch]: Remove exceptions. Make flush and reset return
an error code, repair all the screwed up formatting, and put back
close.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): And here.
* camel-mime-part.c (camel_mime_part_set_content): And this too.
(write_to_stream): Fixed for stream changes.
* camel.h: Fixed.
* providers/vee/camel-vee-folder.c (vee_search_by_expression):
Implement. Performs an intersection of the two searches.
(camel_vee_folder_finalise): Unref search folders.
(vee_append_message): Implement append.
svn path=/trunk/; revision=3142
* camel-multipart.c (write_to_stream): fix a stupid typo. Thank
you, C.
* camel-mime-part.c (write_to_stream): don't ref the stream before
wrapper a filter around it, since nothing will ever unref it.
svn path=/trunk/; revision=2978
* camel-stream.c (camel_stream_read, camel_stream_write,
camel_stream_flush, camel_stream_reset, camel_stream_printf,
camel_stream_write_to_stream): Use CamelException to signal
failure.
(camel_stream_write_strings): Remove. camel_stream_printf is more
useful in most of the places that used this.
(camel_stream_write_string): Change from macro to function to
prevent problems with double-evaluation.
* camel-seekable-stream.c (camel_seekable_stream_seek,
camel_seekable_stream_set_bounds): Use CamelException.
(reset): Update.
* camel-seekable-substream.c, camel-stream-buffer.c,
camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c:
Update.
* camel-stream-fs.c: Remove the virtual init functions and move
the code into the creator functions. Add CamelExceptions to
creation functions that could fail.
* camel-data-wrapper.c (camel_data_wrapper_write_to_stream): Use
CamelException.
* camel-mime-message.c, camel-mime-part.c, camel-multipart.c
(write_to_stream): Update.
* camel-mime-parser.c: add an exception to the mime parser private
data and pass that to stream functions as needed.
* gmime-content-field.c, md5-utils.c: Update (badly) for stream
changes.
* camel-exception.h (camel_exception_is_set): convenience macro.
* providers/Makefile.am: disable SMTP for now
* providers/mbox/camel-mbox-folder.c (mbox_append_message): Pass
CamelException to the functions that now need it. Check the
exception after calling camel_stream_flush, and fail if it fails.
(mbox_get_message_by_uid): More updates.
* providers/pop/camel-pop3-folder.c,
providers/pop/camel-pop3-store.c,
providers/sendmail/camel-sendmail/transport.c: Update.
svn path=/trunk/; revision=2924
> nntp provider (but its broken anyway). The mime parser can be
> used instead though.
> Removed from all code including it (but none were using it).
>
> * gmime-utils.c (_store_header_pair_from_string): Removed bizarre
> string_dichotomy version of this. This code is somewhat redundant
> now, and is headed for death anyway.
>
> * gstring-util.c (g_string_dichotomy): Same with this one.
> (g_string_clone): Removed a memory leak, g_string_new() allocates
> its own memory.
> (g_string_append_g_string): Allow to append an empty gstring onto
> another gstring, dont abort()!
>
> * string-utils.c (string_dichotomy): Removed this incredibly weird
> function.
>
> * camel-folder.c (_create): Replaced the rather obtuse use of
> "string_dichotomy" function with a simple strrchr(). Still not
> sure it'll work.
>
> * camel-folder-summary.c: cvs removed a long-removed file.
svn path=/trunk/; revision=2753
* camel-mime-body-part.[ch]: Remove. We weren't using the fields
that made this different from camel-mime-part, so it basically
just forced us to do lots of gratuitous typecasting.
* camel-multipart.[ch]: Use CamelMimePart. Remove the multipart
parent stuff, since we weren't using that either.
* etc: update for CamelMimeBodyPart -> CamelMimePart
svn path=/trunk/; revision=2645
and fixed at least one problem (end of stream never happening in certain
cases). Things that can fail now have a way of saying they failed too.
So much for taking ANZAC day off to get drunk!
2000-04-26 NotZed <NotZed@HelixCode.com>
* camel-seekable-substream.c (stream_seek): Changed to have
absolute seek semantics, not relative to the bounds.
* camel-seekable-stream.c (reset): When we reset, seek to the
start of the bound, if there is one.
(stream_tell): Make tell virtual.
* camel-stream-filter.c (do_available): Removed.
* camel-stream-buffer.c: Remove leading _'s from static functions.
(stream_read): Renamed from read(). Fancy that conflicting! (my
boo!) Others too.
* providers/pop3/camel-pop3-folder.c (get_message_by_number):
Changed to stream_mem interface.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Fixed
for streamfs interface changes, and implement a failure case.
(_append_message): Changed for fs stream interface change.
* camel-multipart.c (print_part): Iterate rahter than callback. I
hate glists's interface (hence, move this to write_to_stream).
(write_to_stream): Return an error (yuck, this is a royal PITA to
do with the stream write interface).
* camel-mime-message.c: Removed leading _ from static names.
* camel-mime-part.h: construct_from_parser() now returns an error
code.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Changed to use a
camel-data-wrapper instead of a camel-simple-data-wrapper (no
change needed elsewhere?).
(simple_data_wrapper_construct_from_parser): Fixes for stream-mem
interface changes.
* camel-simple-data-wrapper.[ch],
camel-simple-data-wrapper-stream.[ch],
camel-stream-data-wrapper.[ch], removed. Fixed including of these
files.
* camel-mime-part.c (camel_mime_part_set_text): Remove the use of
the camel-simple-data-wrapper-stream, just use a mem stream.
(write_to_stream): Renamed from my_*
(construct_from_stream): Return an error on error.
* camel-stream-mem.c (camel_stream_mem_new*): Remove mode
parameter.
* camel-stream-mem.h (enum CamelStreamMemMode): Removed. It
wasn't used at all.
* camel-data-wrapper.h: Add camel_data_wrapper_new() to create
these.
(write_to_stream, construct_from_stream): Return an error
indicator for success. Fixed all methods to match (ICK).
* Makefile.am (libcamel_la_SOURCES): Remove
camel-simple-data-wrapper.c, camel-simple-data-wrapper-stream.c,
camel-stream-data-wrapper.c. Obsoleted by code re-use!
* camel-data-wrapper.c (construct_from_stream): Change the default
implementation to just set the output stream == construction
stream. Well, this lets me get rid of both simple-data-wrapper
and stream-data-wrapper (unused anyway), and
simple-data-wrapper-stream in one hit. CamelDataWrapper is now
also a concrete class.
(write_to_stream): Use camel_stream_write_to_stream() to
calculate/return values (and save code).
Include <errno.h> for obvious reasons.
* camel-stream.c (eos): Provide a default implementation of .eos().
(camel_stream_write_to_stream): Make it return an error code on
error.
(camel_stream_printf): Changed to return the number of bytes
written/error.
(camel_stream_available): Removed.
* camel-stream-fs.h (enum CamelStreamFsMode): Removed. Changed to
use unix modes and so forth (wasn't used for anything but new file
creation and didn't work well either).
* camel-stream-fs.c: Removed leading _'s for names. And removed
some virtual method 'documentation'.
(destroy): Dont try and close a closed/error fd. Only report
error if close returns -1. Moved all the code to finalise(), and
killed this function.
(init_with_fd): Properly setup the seek offset, if it is a
valid and seekable file descriptor.
(init_with_fd_and_bounds): Use off_t for bounds, set bounds on the
seekable stream.
(init_with_name): Return error codes.
(init_with_name_and_bounds): Ditto.
(camel_stream_fs_new_with_name): REturn NULL object if it failed.
(camel_stream_fs_new_with_name_and_bounds): Return NULL object on
failure. Changed with_name* api's to take unix open style args
and flags.
(read): The bounded stream bounds checking seemed off, simplified
code a bit.
(write): Implement bounds checking for writing, the comment was
wrong, it could make sense to bound writing. Cleaned up a little.
(available): Gone.
(eos): Removed. Use CamelStream's implementation now.
(close): Reset the fd to -1, provide a warning for bad usage.
(seek): Cleaned up. Changed the behaviour a little, the returned
offset is the absolute position in the file, even in bounded
streams.
(seek): Seek from end mirrors lseek() behaviour (reverse seeking).
2000-04-25 NotZed <NotZed@HelixCode.com>
* camel-stream-fs.h (struct _CamelStreamFs): Moved bounds and eof
indicator to other parent classes.
* camel-stream.c (camel_stream_printf): New utility
function. Obvious use.
* camel-stream-mem.c: Removed leading _'s from static func's.
(camel_stream_mem_new_with_byte_array): Fixed for api changes, set
the owner for the byte array to us.
: Removed A bunch of gtk doc stuff for static (implementation) functions.
(available): Removed.
(write): Fixed the write implementation so that seek() works on a
seekable memory stream, as expected. Seeking past the end of the
buffer has unix semantics (filling with 0).
(available): Removed.
(write): Implement seekable stream bounded stream.
(read): Implement seekable stream bounded stream.
(close): Dont free the stream_mem if we're not the owner.
(seek): Allow to seek beyond the end of memory area,
implement bounds checking.
(seek): Set errno on bad policy.
* camel-stream-mem.h (struct _CamelStreamMem): Changed position to off_t.
(new_with_buffer): Changed len to be a size_t.
(set_buffer, set_byte_array): New interface functions.
(struct _CamelStreamMem): Removed position, it is stored in the
superclass.
* camel-stream.h: Removed some of the seemingly random
whitespace. Removed the available method (its not
impelemented/useful enough).
* camel-seekable-substream.c
(init_with_seekable_stream_and_bounds): Remove the data_available
stuff, it hasn't been properly implemented/finished, and may never
work (unfortunately *sigh).
(reemit_parent_signal): Removed part of the above change.
(set_bounds): Removed (moved to seekable-stream).
: Fixed up some of the generally unreadable indenting (sorry,
wrapping at 80 characters with
camels_really_long_function_names()
just_doesnt_work_very_well_does_it().
(available): Removed.
(stream_seek): Fixup for object changes. Make sure we return -1
if the parent stream can't seek.
* camel-seekable-stream.c (ccamel_seekable_stream_set_bounds): New
function to bound any seekable stream.
: Removed _'s.
(camel_seekable_stream_class_init): Implement an init function, to
setup the stream bounds to unbound.
* camel-seekable-stream.h (CamelSeekableStreamClass): New virtual
method set_bounds for seekable streams.
(CAMEL_STREAM_UNBOUND): New define for no bound.
* camel-seekable-substream.h (struct _CamelSeekableSubstream):
Removed sup_bound and inf_bound, moved to CamelSeekableStream (and
renamed, and changed to off_t's).
(new_with_seekable_stream_and_bounds): Use off_t as the bounds.
(CamelSeekableSubstreamClass): Uh, why was the intialiser virtual?
Removed.
* camel-seekable-stream.[ch] (CamelSeekableStreamClass): Changed seek
to accept an off_t as the offset.
(struct _CamelSeekableStream): Renamed cur_pos to position and
changed it to an off_t type.
(enum CamelStreamSeekPolicy): Set to match the SEEK_* constants
from lseek().
(get_current_position): Renamed to tell().
* camel-stream-buffer.h: Commented out set_vbuf - never implemented.
svn path=/trunk/; revision=2624
2000-04-24 NotZed <NotZed@HelixCode.com>
* camel.c (camel_init): No longer call
data_wrapper_repository_init.
* camel-medium.c (write_to_stream): Moved (back) to
camel-mime-part.
(add_header):
(set_header):
(remove_header):
(get_header): Make all these abstract, and spit warnings if
called. I guess it could manage the list, but well, it doesn't.
* camel-medium.h (struct _CamelMedium): Dont store headers here,
the implementor is the only one who knows their format.
(CamelMediumClass): Changed header values to be void *'s. They
need not be strings?
* camel-simple-data-wrapper.c (construct_from_stream): And we're
back. Set the output stream.
(construct_from_parser): Moved to camel-mime-part-utils.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Create the
contents of multipart and simple messages.
* camel-multipart.c (construct_from_parser): Moved to
camel-mime-part-utils.
(separate_part): Removed.
* camel-mime-part.c (construct_from_stream): Back again! This now
switches over to using a mime parser for any mime parts, only.
(my_write_to_stream): Write our headers and so forth here.
(add_header): Add header directly, parent class is abstract.
(remove_header): Ditto.
(set_header): Ditto.
* camel-data-wrapper.c (camel_data_wrapper_construct_from_stream):
Remade abstract.
(camel_data_wrapper_construct_from_parser): Moved to
camel_mime_part.
* camel-data-wrapper.h: Put back construct_from_stream.
* camel-mime-part.h: Put construct_from_parser in here, the
data-wrapper shouldn't know about mime. Ok, so now to undo half
of the last hours changes ... duh.
2a51,93
* providers/pop3/camel-pop3-folder.c (get_message_by_number): Use
construct_from_stream instead of set_input_stream().
* camel-simple-data-wrapper-stream.c
(camel_simple_data_wrapper_stream_construct): REmoved the destroy
callback code.
(wrapper_destroy_cb): Removed.
* camel-simple-data-wrapper.h: Add prototype for _construct()
method.
* camel.c: Include unicode.h to kill a warning.
* camel-data-wrapper.h (CameldataWrapperClass): Removed
construct_from_stream virtual method.
Removed get/set input stream.
* data-wrapper-repository.[ch]: Removed&from build. Obsoleted?
The justification as is follows: It is mixing storage
protocol/format with message architecture. It really just doesn't
serve any purpose, as each medium implementor will have to have its
own type->handler mapping, and the only current implementor,
mimepart has a very simple structure and no need for this.
* camel-medium.c (write_to_stream): Moved here from most of the
stuff in camel-mime-part. Well, the MEDIUM is the one that knows
what the headers are, and the content is, let it write it out.
* camel-mime-part-utils.c (camel_mime_part_construct_content):
Copied from camel-mime-part.c, removed handling of message
followon state (moved to camel-mime-message).
(camel_mime_part_construct_content_from_parser): Renamed from
construct_content.
(camel_mime_part_construct_headers_from_stream):
(camel_mime_part_construct_content_from_stream):
(camel_mime_part_store_stream_in_buffer): Removed. Replaced by
the new construct from parser stuff.
* camel-mime-message.c (construct_from_parser): Do
construct_from_parser for mime-message.
(_write_to_stream): Set the mime-version header for medium to
write out, rather than writing it out ourselves.
4a96,102
(construct_from_stream): Removed.
(camel_data_wrapper_construct_from_stream): Changed to a helper
function, creates a mime_parser, and constructs from that.
(set_input_stream): Removed.
(camel_data_wrapper_set_input_stream): Removed.
(get_input_stream): Removed.
(camel_data_wrapper_get_input_stream): Removed.
11a110,111
(_get_message_by_uid): Use construct_from_stream() instead of
creating our own parser.
16a117,131
(camel_mime_part_construct_content): Removed to
camel-mime-part-utils.c
(my_get_output_stream): Removed. The streeam is in the
data-wrapper.
(my_get_content_object): Removed. The content object is stored in
the medium. If none is there, the object wasn't created properly.
(my_write_content_to_stream): Removed. The content object is the
one that knows how to write itself out!!!!!!!!
(my_write_to_stream): Remove the base header writing stuff - has
been moved to camel-medium, where it belongs. This can just be
used to check for mandatory headers.
(my_construct_from_stream): Removed.
(my_set_input_stream): What the hell, i'll remove this too.
Nobody seems to understand how it differs from create from stream,
and they both seem to serve the same purpose ...
19a135,136
(construct_from_stream): Removed! Job taken over by
construct_from_parser.
24a142
(set_input_stream): REmoved. Replaced by construct_from_parser.
svn path=/trunk/; revision=2577
2000-04-23 NotZed <NotZed@HelixCode.com>
* camel-data-wrapper.c (set_mime_type_field): Ref the
content_field when we get it?
* camel-mime-parser.c (camel_mime_parser_unstep): New function.
Cause a subsequent call to mime_parser_step() to return the same
state over again.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
Initial test code using the mime parser to construct the message.
* camel-mime-part.c (construct_from_parser): part constructor.
(camel_mime_part_construct_content): Basically a simpler
replacement for the datawrapper repository.
(camel_mime_part_init): Set the default type to text/plain.
* camel-simple-data-wrapper.c (construct_from_parser): Initial
implementation of a content constructor.
* camel-multipart.c (construct_from_parser): Multipart
construction routine.
(camel_multipart_init): Set the default multipart type to
multipart/mixed. Duh, no subtype is not allowed anyway.
2000-04-22 NotZed <NotZed@HelixCode.com>
* camel-mime-message.h (struct _CamelMimeMessage): Removed
send_date, and received_date, and replaced it with a time_t
'date' (this is what the header is called), and date_offset to
store the GMT offset of the date.
* camel-mime-message.c (camel_mime_message_set_from): Update raw
header as we go.
(_set_from): Removed.
(_get_from): Removed.
(camel_mime_message_get_from): Moved implementation here.
(camel_mime_message_get_subject): Move implementation here.
(_get_subject): Nuked.
(camel_mime_message_set_subject): Handle utf-8 input, and also
update raw header when changed.
(_set_subject): Removed.
(_set_received_date): Removed.
(camel_mime_message_set_received_date): Removed.
(_get_received_date): Removed.
(camel_mime_message_get_received_date): Removed.
(_get_sent_date): Removed.
(camel_mime_message_get_sent_date): Removed.
(camel_mime_message_get_date): New function to get the date as a
time_t/offset.
(camel_mime_message_set_date): Set the date as a time_t/offset.
(camel_mime_message_get_date_string): Get the date as a string.
(camel_mime_message_init): Initialise the current date as
'CMAEL_MESSAGE_DATE_CURRENT'.
(_set_reply_to): Removed.
(camel_mime_message_set_reply_to): Moved implementation here.
This is still broken, reply-to can have multiple addresses.
(_get_reply_to): Removed.
(_set_field): Removed, no longer used anywhere.
(_get_field): Also removed.
(_init_header_name_table): Add the Date header.
(process_header): Also handle snooping of Date header here.
* camel-stream-filter.c (finalise): Unref the source stream on
finalise, and also call the parent class (oops).
* camel-mime-parser.c (camel_mime_parser_state): New function to
get the current parser state.
(camel_mime_parser_stream): Allow you to get the stream back from
the mime_parser.
(camel_mime_parser_fd): Alternative to allow you to get the fd
back from the mime_parser.
(folder_scan_init_with_stream): Properly ref/unref the stream.
(folder_scan_close): Properly unref the stream/close the fd on
exit.
(folder_scan_init_with_fd): Close the old fd if there is one.
* camel-data-wrapper.c (camel_data_wrapper_construct_from_parser):
New method, construct a data wrapper from an initialised parser.
(construct_from_parser): Empty implementation.
* providers/mbox/camel-mbox-summary.c (message_struct_new):
Convert subject line to unicode, before storing in the summary.
(strdup_trim): Removed, no longer needed.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref
the folder after setting it in the new message.
* camel-mime-part.c (my_set_content_object): Have the headers
follow the content-type change here too.
(my_write_to_stream): Dont write content-type here, automatically
stored in the headers ...
(my_write_to_stream): Use header_disposition_format() to format
the content-disposition header.
(my_write_to_stream): Removed old code, all headers are now stored
in the camel-medium level, always. Need to do the same with
camel-mime-message i suppose ...
(my_write_to_stream): Write the content using the parent class,
not some weird function.
(camel_mime_part_class_init): Dont override get_output_stream.
(camel_mime_part_encoding_from_string): Bleh, make it
case-insensitive.
* camel-mime-utils.c (header_content_type_is): Handle empty types.
(header_encode_string): Start of an implementation of the rfc2047
encoder. It does iso-8859-1, and us-ascii, and utf-8 (others get
tricky *sigh*)
(rfc2047_encode_word): Convert a single word/string into rfc2047
encoding.
(quoted_encode): Different quoted-printable encoding for rfc2047
encoding of headers.
* gmime-content-field.c (gmime_content_field_write_to_stream): Use
header_content_type_format() to format it.
svn path=/trunk/; revision=2560
* camel-multipart.[ch]: clean, document, etc.
(camel_multipart_init): pick a prettier default boundary. Still
need to deal with the larger problem
svn path=/trunk/; revision=2553
* camel-seekable-substream.c
(camel_seekable_substream_new_with_seekable_stream_and_bounds):
make this return a CamelStream rather than a
CamelSeekableSubstream, because that's the way Gtk objects tend to
work.
svn path=/trunk/; revision=2218
2000-03-02 bertrand <bertrand@helixcode.com>
* camel-stream-b64.c (my_read_encode): don't forget to
set the state to 0 after 3.
(my_read_encode): don't forget to encode, even in state 3.
* camel-simple-data-wrapper.c: static functions are prefixed
with my_ instead of _
* camel-multipart.c: static functions are prefixed
with my_ instead of _
(my_write_to_stream): commented.
(my_write_to_stream): warning in case the boudary is set
but is a zero length string.
* camel-mime-part.c (camel_mime_part_encoding_from_string):
remove debug trace.
* camel-mime-part.c: Replaced all static functions
with name begining with _ by the same name begining
with "my_" to prevent the possible conflicts
with system symbols Dan warned us about.
Mime mail generation works now, at least with b64 encoding.
QP needs to be done now.
svn path=/trunk/; revision=2016
* camel/camel-types.h: New header with the typedefs for all camel
classes. Now the class headers can just include this and the
header for the parent type. This makes it possible for
CamelService to include a CamelSession without creating an
#include loop.
* camel/*:
* composer/e-msg-composer-attachment-bar.h:
* mail/folder-browser.c:
* mail/message-list.c: frob #includes to match the new reality
svn path=/trunk/; revision=1850
2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-formatter.c (handle_text_plain):
revamped so that it uses the output stream
of the data wrapper
(handle_text_html): ditto.
* camel/camel-simple-data-wrapper.h:
* camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new):
use (void) instead of ().
(_get_output_stream): simple implementation.
A lot of small fixes so that the new parser scheme
works properly. Simple implementation of the stream
though.
Changed vette-formatter files so that they work with the
new scheme.
The new parser is now in a usable state. Still needs some work but the
infrastructure is here. /me is happy.
svn path=/trunk/; revision=1822
2000-02-16 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-seekable-substream.c (_set_bounds): don't
seek the begining of the substream.
(_eos): fix eos condition testing.
(_finalize): unref parent stream
(_init_with_seekable_stream_and_bounds): ref parent stream
* camel/gstring-util.c (g_string_equal_for_hash):
(g_string_equal_for_glist): return type is int.
* camel/camel.h:
* camel/camel.c (camel_init): use (void)
instead of ().
A lot of other small changes to make the set_input_stream
scheme work. It actually works.
svn path=/trunk/; revision=1798
2000-02-15 bertrand <bertrand@helixcode.com>
* camel/camel-multipart.c (_localize_part):
this routine replaces the _read_part routine
and does not store the part in a buffer.
(_set_input_stream): use the set_input_stream
instead of the construct_from_stream.
each bodypart is given an input stream.
* camel/camel-mime-part-utils.c:
include the data-wrapper-repository header.
(camel_mime_part_construct_content_from_stream):
use the set_input_stream instead of the
construct_from_stream method.
* camel/camel-seekable-substream.c (_set_bounds):
cur position is set to 0 not to inf_bound.
Sync
svn path=/trunk/; revision=1790
2000-02-15 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-mime-part.c: include gmime-base64.h
various compilation and runtime fixes.
(_set_input_stream): store the input substream
for the content object.
* camel/camel-data-wrapper.h: declare the
set/get function on input/output stream.
* camel/camel-mime-part.c (_get_content_object):
don't use a temporary mem stream.
* camel/camel-seekable-substream.c (_seek):
(_eos):
(_read): the substream can be unlimited in length
* camel/camel-data-wrapper.c (camel_data_wrapper_class_init):
set the get/set_input/output_stream methods.
* camel/camel-multipart.c (_construct_from_stream):
camel_stream_seek -> camel_seekable_stream_seek
work on the new parser scheme.
temporary sync to laptop.
svn path=/trunk/; revision=1781
2000-02-09 bertrand <Bertrand.Guiheneuf@aful.org>
* tests/ui-tests/message-browser.c: various typo
fixes in the ctree construction.
* camel/string-utils.c (string_trim): fix braindead
trailing trim bug.
* camel/gmime-content-field.c (gmime_content_field_construct_from_string):
strip the leading and trailing quotes when constructing the
content field. This should be done in a more generic
RFC822 approach, but this fixes a bug that prevent
matt from analysing some multipart messages.
* camel/camel-data-wrapper.h: reorganize the
deprecated and new methods.
* camel/providers/mbox/camel-mbox-folder.c
(_check_get_or_maybe_generate_summary_file):
Use "From " as the message separating string.
* camel/providers/mbox/camel-mbox-folder.c (_append_message):
set the mode when creating the mbox file.
* camel/providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev):
ditto
* camel/providers/mbox/camel-mbox-summary.c (camel_mbox_save_summary):
ditto
svn path=/trunk/; revision=1711
1999-08-17 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-stream.c (camel_stream_read):
return the number of bytes read.
How can this have ever worked ?
(camel_stream_flush): don't return anything.
* camel/gmime-utils.c (get_header_table_from_stream):
mem leak fixed.
+ various other mem leaks.
svn path=/trunk/; revision=1120
* camel/camel-mime-part.c (_set_content_object):
There is a probleme here. We can not allow mime part
content-type field and content_object mime-type to be
different. I thus chosed to set mime part object
content field to be freed (if necessary) and set
to be a pointer to content_object mime type
field.
(_construct_from_stream): set content_object mime type
to be the same as mime_part's one. This is necessary
because we use _set_content_type.
This two things are a bit hackish ansd may need
to be redesigned.
svn path=/trunk/; revision=1071
Making it work with other types is now just a matter of writing
the various data wrappers. And display them will just be a matter of writing
the good bonobo components.
1999-08-03 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-simple-data-wrapper.c (_construct_from_stream):
more debugging output + nb_bytes_read is now a signed int
to avoid bug when eos is encountered.
* camel/camel-mime-part.c (_construct_from_stream):
sync to data_wrapper_repository function name changes.
Use default "text/plain" type when conten-type field
is not found. (following RFC 2046 spec).
* camel/data-wrapper-repository.c (data_wrapper_repository_set_data_wrapper_type):
(data_wrapper_repository_get_data_wrapper_type):
change function name prefix (s/data_wrapper/data_wrapper_repository/)
* camel/camel-multipart.c (_read_part):
add `\n` at eol but not before boundary.
* camel/gmime-utils.c (get_header_table_from_stream):
correct implementation of end of stream detection.
svn path=/trunk/; revision=1070
* camel/camel-multipart.c (_read_part):
use a stream to store the part instead of GString.
* camel/camel-mime-part.c (camel_mime_part_set_text):
set data wrapper content type to "text/plain".
* camel/camel-stream-mem.c:
* camel/camel-stream-mem.h:
new memory buffer based stream.
* camel/camel-stream-fs.c (_seek):
implementation for file system based stream.
* camel/camel-stream.c (camel_stream_seek):
new method.
* camel/camel-stream-fs.c (camel_stream_fs_class_init):
pass CamelStreamFsClass instead of CamelStreamClass.
svn path=/trunk/; revision=1069
* camel/gmime-utils.c (gmime_read_line_from_stream):
do not return NULL when line is empty.
* camel/camel-multipart.c (_read_part): return true when end
of multipart is found, not the contrary
svn path=/trunk/; revision=1055
