2001-01-26 Jeffrey Stedfast <fejj@ximian.com>
* subscribe-dialog.c (populate_store_foreach): Check for a NULL
service->url as we obviously can't subscribe to folders on a
non-existant mail source :-)
(subscribe_do_get_store): Check for a NULL url here too, not that
we should need it anymore (due to the above fix) but it doesn't
hurt. Also, should we wait on the thread? Probably doesn't matter.
svn path=/trunk/; revision=7844
* mail-tools.h: s/filter-driver.h/camel-filter-driver.h/ and
update first arg of mail_too_filter_get_folder_func
* mail-tools.c (mail_tool_filter_get_folder_func): Update first
arg to CamelFilterDriver *
* mail-send-recv.c (receive_status):
* mail-ops.c (send_queue_send): s/FILTER/CAMEL_FILTER/
* mail-callbacks.c: Remove filter-driver.h include
* mail-accounts.c: Put the news functions inside #ifdef
ENABLE_NNTP to prevent warnings about unused statis functions.
* subscribe-dialog.c (subscribe_folders, unsubscribe_folders,
subscribe_refresh_list): Update prototype to match BONOBO_UI_VERB.
(populate_store_list): add a de-constifying cast
svn path=/trunk/; revision=7708
* subscribe-dialog.c (recursive_add_folder): New function to add a
folder and any parents of it that don't yet exist. Fixes bugzilla
#1028.
svn path=/trunk/; revision=7658
2001-01-12 Jeffrey Stedfast <fejj@ximian.com>
* mail-config.glade: Anna's dialogs.
* mail-config.c (mail_config_get_account_by_address):
Removed. Danw and I decided on setting a X-Evolution-Transport
header on messages going to the Outbox so we can later guess which
transport to use when sending it.
* mail-account-editor.c (apply_changes): Update to some day be
able to support SSL.
(construct): Update for Anna's dialogs...
* subscribe-dialog.c (populate_store_list): Updated to reflect
past changes to the mail-config API.
svn path=/trunk/; revision=7461
had changed it to use ->full_name instead of ->name because that's
what camel_store_subscribe_folder needed. So we need to have
*both* names available, one for Camel, one for the shell.
svn path=/trunk/; revision=7181
* subscribe-dialog.c (setup_subscribe_folder): Use info->name, not
input->full_name. Fixes#1029 in bugzilla.helixcode.com.
svn path=/trunk/; revision=7180
* subscribe-dialog.c (folder_toggle_cb): Update this for the new
signal handler prototype. Fixes the crash on double-click.
svn path=/trunk/; revision=7059
2000-12-08 Christopher James Lahey <clahey@helixcode.com>
* folder-browser.c: Connect to signals on the ETable instead of
the ETableScrolled.
* subscribe-dialog.c: Used the e_table_scrolled_get_table function
instead of accessing the variable directly.
svn path=/trunk/; revision=6873
2000-12-04 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.c (setup_subscribe_folder): Use info->full_name
rather than info->name so that we get the namespace part of the
folder path as well.
svn path=/trunk/; revision=6783
2000-11-13 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.c (subscribe_do_subscribe_folder): Take a
'subscribe' argument so that this can function as a subscribe AND
unsibscribe method.
(describe_subscribe_folder): Updated.
(do_subscribe_folder): Updated.
(cleanup_subscribe_folder): Updated.
(subscribe_folder_info): Pass along a TRUE as the 'subscribe'
param.
(unsubscribe_folder_info): Pass along a FALSE as the 'subscribe'
param.
svn path=/trunk/; revision=6565
and do a first cut at folder tree highlighting (for IMAP/news
only).
* mail-ops.c (do_fetch_mail): For imap (sigh, we *still* shouldn't
be hardcoding that), rescan the store's folder tree, rescan each
changed folder for new messages, and update the shell folder tree.
(do_scan_subfolders): Update for component-factory.c changes, and
set folder display names and highlights appropriately when
building the storage.
* component-factory.c (add_storage): Make this static (was
mail_add_new_storage). Use camel_service_get_name for the name
rather than url->host. (Among other things, this lets you use a
single machine as both an IMAP server and a news server.)
(mail_lookup_storage): Hash storages based on their CamelStore
rather than the URL.
(factory_destroy): Disconnect each of the CamelStores in the
storages_hash.
* subscribe-dialog.c (cleanup_subscribe_folder):
* mail-vfolder.c (vfolder_refresh): Pass "highlighted" flag to
evolution_storage_new_folder
svn path=/trunk/; revision=6342
2000-11-01 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.h: add fields search_entry and search_top.
* subscribe-dialog.c: add mail-ops.c style async operations for
getting the store (to remove deadlock in the case where a auth
dialog is dismissed at startup and then the subscribe dialog is
brought up), and subscribing/unsubscribing to folders. One case
remains, that is getting the list of all folders.
(subscribe_search): flesh out this function
(build_tree): use the search_top field so we can search for
groups/folders.
(subscribe_dialog_destroy): free search_top.
(subscribe_dialog_construct): init search_top.
svn path=/trunk/; revision=6331
* subscribe-dialog.c (folder_info_subscribed,
subscribe_folder_info, unsubscribe_folder_info): Don't prepend "/"
to the folder's full_name. Deal with hierarchy in the
EvolutionStorage tree better.
(storage_tree_path): Helper function to build a storage path from
a CamelFolderInfo.
svn path=/trunk/; revision=6168
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (folder_etree_value_at): special case for
folders with NULL urls (which aren't selected/subscribeable).
(unsubscribe_folder_info): can't (un)subscribe from folders with
non-NULL urls.
(subscribe_folder_info): same.
svn path=/trunk/; revision=5879
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (FOLDER_ETABLE_SPEC): set expansion to 0.0,
minimum-width to 16, and resizable to false for the subscribed
column.
(folder_info_subscribed): new function so we can do the correct
path munging.
(subscribe_folder_info): only add the folder to the storage if
there wasn't an exception subscribing it.
(unsubscribe_folder_info): same, but unsubscribing.
(folder_etree_value_at): use folder_info_subscribed.
(folder_toggle_cb): same.
(unsubscribe_folder_foreach): same.
(subscribe_folder_foreach): same.
(subscribe_dialog_gui_init): set the bold column on the text cell,
and add the subscribed pixbuf.
svn path=/trunk/; revision=5869
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (STORE_ETABLE_SPEC): change cell type to
"string" since we're not including it in the extras.
svn path=/trunk/; revision=5862
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h, subscribe-dialog.c: Changed
these to use the proper form for the column element.
svn path=/trunk/; revision=5849
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h, subscribe-dialog.c: Updated
these to the new ETable style of specifications.
svn path=/trunk/; revision=5845
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): convert to the
new gal e-table stuff.
(html_size_req):
(html_new):
(put_html): #if 0 out the html functions since description stuff
isn't used and we don't want the warnings.
svn path=/trunk/; revision=5842
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): remove the html
description stuff for now.
svn path=/trunk/; revision=5838
2000-10-10 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (folder_toggle_cb): umm.. duh :) only
subscribe if it's not subscribed, and vice versa.
(subscribe_folder_foreach): make sure to call
e_tree_model_node_changed.
(unsubscribe_folder_foreach): make sure to call
e_tree_model_node_changed.
svn path=/trunk/; revision=5831
2000-10-10 Chris Toshok <toshok@helixcode.com>
* mail-ops.c (setup_scan_subfolders): add a ref to input->storage
here so that the ref/unref pattern more closely matches other
mail-ops. also, this keeps the storage from being freed when we
hit the unref in cleanup_scan_subfolders, which is important
because we maintain a reference to it in the storage_hash in
component-factory.c
* subscribe-dialog.h: add storage field.
* subscribe-dialog.c (subscribe_folder_info): new function,
subscribe to a folder given it's CamelFolderInfo, and add it to
the shell - we're generating a path from the name of the folder
which is bad.
(unsubscribe_folder_info): same (except we unsubscribe and remove
from the shell).
(storage_selected_cb): unref the currently selected storage.
(subscribe_dialog_destroy): unref the currently selected storage.
(subscribe_dialog_construct): sc->storage = NULL.
* component-factory.c (mail_lookup_storage): new function, to look
up a EvolutionStorage corresponding to a CamelService. we ref the
EvolutionStorage before passing it back.
(mail_add_new_storage): insert the storage into storages_hash if
result is EVOLUTION_STORAGE_OK.
* mail.h: add prototype for mail_lookup_storage.
svn path=/trunk/; revision=5830
2000-10-09 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c, subscribe-dialog.h: use our own etable to
display the stores, and get them from the mail-config api. put
#if 0'ed code in place to add/remove the folders from the shell
when they're subscribed/unsusbcribed. also, react to double
clicks in the folder etable by toggling subscription status.
svn path=/trunk/; revision=5809
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c, subscribe-dialog.h: add a
storage-set-view-listener, and add a little printf saying what
storage was selected.
svn path=/trunk/; revision=5688
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): get
Evolution::StorageSetView interface on our storage set view
control, and set "show_folders" to FALSE.
svn path=/trunk/; revision=5683
2000-10-02 Chris Toshok <toshok@helixcode.com>
* Makefile.am (INCLUDES): add -I$(top_srcdir)/widgets/misc
* subscribe-dialog.c (subscribe_dialog_gui_init): change the
window title to Manage Subscriptions, bold subscribed folders, and
add a title bar ala the evolution shell (but without the close
button).
svn path=/trunk/; revision=5682
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.h: add fields for the storage set
Bonobo_Control and Evolution_StorageSetView interfaces.
* subscribe-dialog.c (subscribe_dialog_gui_init): create the uih
as early as possible, and add the storage set view to the left
side of the hpaned.
svn path=/trunk/; revision=5681
